Dell PowerSwitch S5212F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 33

Download OS10 image for upgrade NOTE: For MX-Series Ethernet I/O modules, OS10 updates are packaged as Dell Upgrade Packages (DUPs) and can be downloaded from www.dell.com/support/. For information on how to download the DUP files to upgrade OS10 on an MX9116n and MX5108n switch, see the Dell EMC SmartFabric OS10 Release Notes-Release 10.5.0. To upgrade an existing OS10 image, first download a new OS10 Enterprise Edition image from DDL. 1. Sign into DDL using your account credentials. 2. Locate the entry for your entitlement ID and order number, and then select the product name. 3. Select the Available Downloads tab on the Product page. 4. Select the OS10 Enterprise Edition image to download, and then click Download. 5. Read the Dell End User License Agreement, and then scroll to the end of the agreement and click Yes, I agree. 6. Select how to download the software files, then click Download Now. 7. After you download the OS10 Enterprise Edition image, unpack the .tar file and store the OS10 binary image on a local server. To unpack the .tar file, follow these guidelines: ● Extract the OS10 binary file from the .tar file. For example, to unpack a .tar file on a Linux server or from the ONIE prompt, enter: tar -xf tar_filename NOTE: Some Windows unzip applications insert extra carriage returns (CR) or line feeds (LF) when they extract the contents of a .tar file. The extra CRs and LFs may corrupt the downloaded OS10 binary image. Turn OFF this option if you use a Windows-based tool to untar an OS10 binary file. For example, in WinRAR under the Advanced Options tab, de-select the .tar file smart CR/LF conversion feature. ● Generate a checksum for the downloaded OS10 binary image by using the md5sum command on the image file. Ensure that the generated checksum matches the checksum in the image MD5 file that is extracted from the .tar file. md5sum image_filename 8. Follow the procedure in Install OS10 upgrade. Install OS10 upgrade After you download and unpack a new OS10 binary image as described in Download OS10 image for upgrade, follow these steps: NOTE: During the OS10 image upgrade process in a VLT setup, when the VLT peers are running different software versions, make no configuration changes on a VLT peer. Ensure that both nodes are upgraded to the same version before you make any configuration change. NOTE: On an MX-Series I/O module, install OS10 upgrades in downloaded DUP files by following the instructions in the Dell EMC SmartFabric OS10 Release Notes-Release 10.5.0. NOTE: While performing an upgrade from 10.4.0E.R4S to 10.5.0.4 and later in GUI mode, all the IOMs may get upgraded with a time-out notification to the OME-M or an IOM (DNV Master) may not get upgraded. Check the IOMs to ascertain whether the upgrade was successful or not. If the IOMs did not get upgraded, re-initiate the upgrade for the impacted nodes. 1. (Optional) Back up the current running configuration to the startup configuration in EXEC mode. OS10# copy running-configuration startup-configuration 2. Back up the startup configuration (startup.xml) in EXEC mode. copy config://startup.xml ftp://userid:passwd@hostip/backup_filepath/10.5.0.4startup.xml 3. Download the new OS10 binary image, also called the standby image, from a local server using the image download server-filepath/filename command in EXEC mode; for example: OS10# image download sftp://admin:[email protected]/home/admin/images/OS10EE.bin Getting Started with Dell EMC SmartFabric OS10 33