Dell PowerSwitch S5212F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 1147

Security and Access Command Mode Usage Information Example Sysadmin, secadmin, netadmin EXEC This CLI is available only when you enable secure boot. If the startup configuration file is deleted or compromised, use the protected version of the startup configuration file to restore the configuration during a reboot. OS10# secure-boot protect startup-config Supported Releases 10.5.1.0 or later secure-boot enable Enables secure boot. Syntax Parameters Default Security and Access Command Mode Usage Information secure-boot enable None Disabled Sysadmin CONFIGURATION If you enable secure boot, ensure that you manually protect the startup configuration file before you reload the switch. The protected version of the startup configuration file is applied during the boot up process. If a protected version of the startup configuration file is not available, the system applies the default configuration. The no version of this command removes the configuration. Example OS10# secure-boot enable Supported Releases 10.5.1.0 or later image verify Verifies the OS10 image file using sha256, PKI, or GPG signatures. Syntax Parameters image verify image-filepath {sha256 signature signature-filepath | gpg signature signature-filepath | pki signature signature-filepath public-key key-file} ● image-filepath-Enter the absolute path name of the OS10 image file. ● sha256 signature signature-filepath-Verify the SHA-256 cryptographic hash signature of the image file. ● gpg signature signature-filepath-Verify the GNU privacy guard signature of the image file. ● pki signature signature-filepath public-key key-file-Verify the PKI-signed digital signature of the image file. Default Security and Access Command Mode None Sysadmin EXEC Security 1147