Dell PowerSwitch S5212F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 1203

Supported Releases 10.5.1.0 or later switchport port-security (global) Enables the port security feature on the system globally. Syntax Parameters switchport port-security None Default Command Mode Port security is enabled globally. ● CONFIGURATION Usage Information After you enable the port security feature on the system globally, enable port security on the required interfaces using this command in INTERFACE CONFIGURATION mode. The no version of this command disables the port security feature on the system. Example OS10(config)# no switchport port-security Supported Releases 10.5.1.0 or later sticky Enables sticky MAC address learning or converts existing dynamic MAC addresses as sticky. Syntax Parameters sticky None Default Command Mode Disabled CONFIGURATION-PORT-SECURITY Usage Information This command enables sticky MAC address learning or converts existing dynamic MAC addresses as sticky. Sticky MAC addresses persist system reloads. For the sticky MAC feature to function, enable MAC address learning limit using the mac learn-limit command. Example OS10(config-if-port-sec)# sticky Supported Releases 10.5.1.0 or later aging Enables the aging timer for dynamically-learned MAC addresses on an interface that is configured with port security. Syntax Parameters aging {off | on} None Default Command Mode Dynamically-learned MAC addresses on an interface that is configured with port security do not age out. CONFIGURATION-PORT-SECURITY Usage Information Secure sticky MAC addresses never age out. Security 1203