Epson 835p User Manual - Page 12

Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: note You won't need all these components; your configuration will determine which ones you need. Projector Remote control and batteries EastMP™ software CD-ROM Power cord VGA computer cable USB cable 802.11g wireless card Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location. If you are moving the projector by hand, use a carrying case. See page 13 for ordering information, and page 166 for transportation instructions. Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-Video signal, you'll need an S-Video cable. One may be provided with your video equipment, or you can purchase one from Epson; see page 13. ■ To receive a component video signal from a VCR or other video device, you'll need a component video cable. You can purchase one from Epson; see page 13. 12 Welcome