Epson 835p User Manual - Page 83

Projecting Wirelessly Once you've started EasyMP and set up your projector and computer in either Ad Hoc mode or Access Point mode, follow these steps to start NS Connection and project wirelessly. 1. Make sure you've installed your 802.11g wireless card in your projector (see page 60). 2. Windows: Select EMP NS Connection from the Start menu. Macintosh OS X: Double-click the EMP NS Connection icon in your Applications folder. 3. The first time you start NS Connection, you may see a dialog box asking you to select your network. Select the IP address for your computer's network card and click OK. note If you don't see your network adapter's IP address, allow a minute for it to appear. If your access point or AirPort base station uses DHCP (Distribute IP addresses setting is enabled for AirPort), sometimes it takes a minute for the server to pick up the IP address. Once you've selected the IP address for your network adapter, you won't see the Switch network dialog box when you start NS Connection. If you want to change to a different network adapter, click Extension on the EMP NS Connection dialog box, then click Switch LAN on the extension dialog box. Presenting Through a Wireless Network 83