Epson 835p User Manual - Page 145
Using E-mail Alerts
![]() |
UPC - 010343851160
View all Epson 835p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
The following table explains the functions of the control buttons: Control buttons Turns the projector on Turns the projector off Changes the video signal to the Computer/Component 1 port Changes the video signal to the Computer/Component 2 port Changes the video signal to the S-Video port Changes the video signal to the Video port Switches the display to EasyMP Using E-mail Alerts You can set up e-mail alerts to warn you of problems with the projector on either a wireless network or a wired LAN connection. 1. Do one of the following: ■ Insert the Epson 802.11g wireless card and set up your projector to work in Access Point mode, as described on page 68. ■ Configure your projector for a wired network, as described on page 138. 2. Turn on your projector and remote control. note The projector must be plugged in (projecting or in standby mode) for you to be able to connect to it. To access a projector in standby mode, you must select Network ON as the Standby Mode setting in the projector's menu system (see page 134.) Remember that when Standby Mode is set to Network ON, the exhaust fan continues to operate after the projector enters standby mode. Managing Projectors 145
![](/manual_guide/products/epson-835p-user-manual-3b83038/145.png)