Epson 835p User Manual - Page 56
Connecting to a Digital Camera or Other Device, Removing the USB Cable
UPC - 010343851160
View all Epson 835p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
note Use a cable less than 10 feet long and connect the camera directly to the projector. Your projector may not function correctly if you use a longer cable or connect your camera to a USB hub. Connecting to a Digital Camera or Other Device You can connect your digital camera, USB flash memory drive, USB hard drive, or digital photo storage device, such as the Epson P-1000, to the projector using the USB cable specified for your device. Then you can use your camera's slideshow function or the projector's EasyMP CardPlayer feature (see page 99) to present images. 1. Make sure there is no card inserted in the projector's card slot. 2. Connect the flat end of the USB cable to the USB Type A port on the projector, as shown. 3. Connect the square end of the cable to your camera or other device. Removing the USB Cable If you're using CardPlayer to project your images, close the program before you remove the USB cable from the projector. 1. Position the cursor over the EJECT button in the upper right corner of the CardPlayer screen. 2. Press the Enter button on the remote control to close CardPlayer. 3. Disconnect the USB cable. 56 Connecting to Computers, Cameras, and Other Equipment