Epson 835p User Manual - Page 174

The image isn't square, but keystone-shaped. ■ If the top or bottom of the image is broader, press the Sync + or Sync - button on the projector until the image is square. ■ If the projector is angled toward the screen from the left or right, the image will be broader on one side. Center the projector in front of the middle of the screen, facing the screen squarely. If this doesn't work, press the Tracking + or Tracking - button on the projection until the image is square. ■ If the image has no parallel sides, use Quick Corner. Press the Menu button, select the Setting menu, and select Keystone. Select Quick Corner and make your adjustments with the pointer button. See page 36 for details. The image contains static or noise. ■ Make sure the correct input signal is selected in the Signal menu (see Chapter 6). ■ If you're using a computer cable longer than 6 feet, or an extension cable, the image quality may be reduced. ■ Keep your computer and video cables away from the power cord as much as possible to prevent interference. ■ The video signal may be split between the computer and the projector. If you notice a decline in the projected image quality when the image is displayed simultaneously on your notebook computer and the projector, turn off the notebook's LCD display. The image is blurry. ■ There may be dirt or smears on the lens. Clean the lens as described on page 162. ■ Adjust the focus using the focus buttons (see page 25). ■ Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment to a warm environment. 174 Solving Problems