Epson 835p User Manual - Page 18

Projecting the Image Make sure your projector and other equipment are set up as described on page 45. Then follow the instructions below to start the projector and display an image. note To shut down the projector, see page 29. Shutting down the projector correctly prevents premature lamp failure and possible damage from overheating. Turning On the Projector Turn on any connected computer or video equipment before starting the projector so it can automatically detect and display the image source. If you turn on the projector first, or have multiple pieces of connected equipment, you may have to select the image source manually (see page 20). Follow these steps to turn on the projector: 1. Remove the lens cap. 2. Plug one end of the power cable into the projector, and the other end into a grounded electrical outlet. note If the Direct Power ON feature has been enabled (as described on page 30), the Power light flashes green (instead of orange) when you plug it in. When the light stays green, the projector is ready for use. 3. Wait until the Power light remains orange. Power light 18 Displaying and Adjusting the Image