Epson 835p User Manual - Page 165
Resetting the Lamp Timer, Reset the lamp timer as described in the next
![]() |
UPC - 010343851160
View all Epson 835p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
8. Loosen the two screws holding the lamp in place (you don't need to remove them). Loosen, but don't remove these screws 9. Grasp the handles as shown and pull the lamp straight out. 10. Gently insert the new lamp. (If it doesn't fit easily, make sure it is facing the right way.) 11. Once the lamp is fully inserted, tighten its screws and replace the cover, then tighten the cover screw. (The projector won't come on if the lamp cover is loose.) 12. Reset the lamp timer as described in the next section. Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector's menus. 1. Press the Menu button on the remote control or on the projector's control panel. You see the main menu. Maintaining the Projector 165
![](/manual_guide/products/epson-835p-user-manual-3b83038/165.png)