Epson 835p User Manual - Page 71
Setting Up Your Macintosh for Access Point Mode on If, main EasyMP Network Screen.
UPC - 010343851160
View all Epson 835p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
9. If you want to monitor the projector using HP OpenView™ , you'll need to enter at least one trap IP address. See page 139 for details on monitoring the projector. 10. When you're done making these settings, highlight the OK button at the top of the screen (you can either use the button on the remote control or press Esc to highlight it), then press Enter. Highlight the OK button again and press Enter to return to the main EasyMP Network Screen. Now you're ready to set up your computer for wireless projecting. Go to "Configuring the Network Settings for Windows" below, or go to "Setting Up Your Macintosh for Access Point Mode" on page 77. If you need to use WEP, WPA, or LEAP security options, see page 79 to set up the option that your network uses on the projector. Configuring the Network Settings for Windows Before connecting to the projector, you need to make sure the settings for your computer's wireless card or adapter match the settings you entered for the projector. 1. Access your wireless network Properties window. For example, in Windows XP you would click Start > Control Panel > Network and Internet Connections. Then click the Network Connections icon. Presenting Through a Wireless Network 71