Epson 835p User Manual - Page 122

tip Before adjusting tracking or sync, fill the screen with an image containing fine detail. For example, in Windows you can select a pattern to appear as your desktop background. If this option isn't available, try projecting black text on a white background. Preset button 2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Auto Setup Leave this setting ON to automatically optimize the computer image. Turn it off if you want to save adjustments you have made to the video settings. ■ Resolution If your image is distorted (compressed, stretched, partially cut off, or doesn't completely fill the display area), the projector's resolution setting may not match that of your computer. Select Auto to let the projector adjust the resolution automatically, or Manual to adjust the setting yourself. (Press Enter after you make the selection.) ■ Tracking Adjust this value to eliminate vertical stripes in the image. ■ Sync Adjust this value if the image appears blurry or flickers. ■ Position If the image is slightly cut off on one or more sides, it may not be centered exactly. Select this setting and use the pointer button to center it. ■ Preset Once you've fine-tuned the settings in the Signal menu for the computer you're using, you can save them as a group using one of the ten Preset settings. The next time you use the same computer, simply press the Preset button on the remote control to recall your saved settings. (Press the Preset button repeatedly to select the number corresponding to the setting you want to use.) ■ Computer 1 Input/Computer 2 Input If the colors don't look right on the Auto setting, select the setting for the type of equipment you've connected to the Computer/Component port(s): RGB: For a computer connection. 122 Fine-Tuning the Projector