Epson 835p User Manual - Page 123
Adjusting the Image Size, Shape, and Position
![]() |
UPC - 010343851160
View all Epson 835p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Component Video: For a video player that outputs a component video signal. Progressive: Use Film/Auto for projecting film or to automatically determine the setting, choose Video for video images, or choose OFF to convert each field of interlaced signals to progressive signals. ■ Video Signal Leave this setting at Auto unless you are using a 60-Hz PAL system (select PAL60). Adjusting the Image Size, Shape, and Position Whether you're projecting from a computer or video player, you can use these settings to adjust the size, shape, and position of the image. ■ Resize button Adjusts how an image fits into the display area. For computer images, resizing is normally unnecessary, since the projector automatically resizes the image to make the best use of the display area. If you press the Resize button on the projector or remote control, the projector displays the image at the output resolution of the computer (which makes the image larger or smaller, depending on its resolution). If the resolution of the image is the same as the projector's (1024 × 768), pressing Resize has no effect. For video images, pressing Resize switches the aspect ratio between 4:3 and 16:9. This lets you play certain digital video images or movies recorded on certain DVDs in 16:9 widescreen format. ■ Keystone (in the Setting menu) Squares up the shape of the image after the projector has been tilted upward or angled to one side (see page 26). If you notice lines or edges looking jagged after adjusting the shape, decrease the Sharpness setting (see page 120). note If your computer image is stretched, compressed, or doesn't fit correctly on the screen, try adjusting the Resolution setting first (see page 122). Fine-Tuning the Projector 123
![](/manual_guide/products/epson-835p-user-manual-3b83038/123.png)