Epson 835p User Manual - Page 81
Adding WPA Security, Highlight
UPC - 010343851160
View all Epson 835p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
■ For 64 bit WEP encryption with hexadecimal input, enter 10 characters, from 0 to 9 and from A to F. ■ For 128 bit WEP encryption with ASCII or text input, enter 13 alphanumeric characters. ■ For 64 bit WEP encryption with ASCII or text input, enter 5 alphanumeric characters. 6. When you're done making settings, highlight the OK button at the top of the screen and press Enter. Adding WPA Security When you click the Security button on the Network screen, you see this screen: note WPA is available on the Macintosh only if the wireless LAN on your Mac supports WPA authentication. 1. Highlight WPA and press Enter. 2. Highlight the PSK (pre-shared key) text box and press Enter. The text box turns yellow to indicate you are in input mode. Press the pointer button up to select individual letters in alphabetical order, or down to select letters in reverse order; then press the pointer button to the right to move to the next character position. When done typing the key, press Enter. 3. When you're done making settings, highlight the OK button at the top of the screen and press Enter. note If you want to enter a blank space, use the space character that comes before the capital letter A. If you want to enter numbers, press the Num button on the remote control. The button lights up to indicate that the numeric keypad mode is active. Press the Num button again to exit numeric keypad mode. Presenting Through a Wireless Network 81