Epson ET-4550 User Manual - Page 155

Setting Dial Tone Detection Line Type Header Options Description On Automatically dials the number you enter for faxing when the product detects a dial tone. Off Turns off automatic dial tone detection, which may be necessary if the product is connected to a PBX (Private Branch Exchange) or a TA (Terminal Adapter). The product may drop the first digit of a fax number and send the fax to the wrong number. PSTN Selects a standard phone line (Public Switched Telephone Network). PBX Selects Private Branch Exchange, the type of phone line used in office environments where an access code such as 9 must be used to call an outside line Fax Header Lets you set up the header information for outgoing Your Phone Number faxes. Parent topic: Setting Up Fax Features Using the Product Control Panel Receive Settings - Fax Set the receive options you want to use for incoming faxes. Setting Receive Mode DRD Options Manual Auto All Single Double Triple Double&Triple Description Lets you confirm whether an incoming fax should be printed; a telephone must be connected to the product. Automatically receives and prints faxes. If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two or more phone numbers to the same line and assign different ring patterns to each. If you use this service, select the number of rings for your fax number so your product can receive faxes on the correct number of rings. All works for phone lines that do not use this service. 155