Epson ET-4550 User Manual - Page 39
Wi-Fi Protected Setup (WPS), Using WPS to Connect to a Network
View all Epson ET-4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
You see the connection symbol on the LCD screen and should be able to print directly to your product from your computer or device. Note: If the connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again. Parent topic: Wi-Fi Direct Mode Setup Wi-Fi Protected Setup (WPS) If your network uses a WPS-enabled wireless router or access point, you can quickly connect your product to the network using Wi-Fi Protected Setup (WPS). Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network Parent topic: Wi-Fi or Wired Networking Using WPS to Connect to a Network If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. Press the up or down arrow button, select Wi-Fi Setup, and press the OK button. You see this screen: 2. Press the down arrow button, select Push Button Setup (WPS), and press the OK button. 39