Epson ET-4550 User Manual - Page 186
Receiving Faxes Automatically, Parent topic, Setup, Fax Settings, Receive Settings, Receive Mode
View all Epson ET-4550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
If you connected a telephone to your product so you can use the same phone line for faxes and voice calls, you can also set your product to receive faxes manually. This allows you to check for a fax tone using the telephone and press a button on your product to receive the fax. Make sure to load paper in your product and select your fax settings before receiving a fax. Note: If you run out of paper during fax printing, load more paper and press the button indicated on your product's LCD screen to continue. Note: Do not turn the product off while it is receiving a fax. Otherwise, the fax transmission will be lost. Parent topic: Receiving Faxes Receiving Faxes Automatically To receive faxes automatically, make sure Receive Mode is set to Auto (the default setting for the product). To change the Receive Mode setting if necessary, select Setup > Fax Settings > Receive Settings > Receive Mode. If an answering machine is connected, make sure the product's Rings to Answer setting is set higher than the number of rings your answering machine is set to answer a call. For example, if the answering machine is set to pick up on the fourth ring, set the product to pick up on the fifth ring or later. Parent topic: Receiving Faxes Related tasks Receiving Faxes Manually Receiving Faxes Manually You can set up your product to receive faxes manually by setting the Receive Mode to Manual. This lets you check for a fax tone on the connected telephone before receiving a fax. 1. When the connected telephone rings, answer the call. 2. If you hear a fax tone, select Receive on the product control panel. 3. Press one of the Start buttons to start receiving the fax. 4. Hang up the telephone. Parent topic: Receiving Faxes 186