Epson LQ-860 User Manual - Page 147
Testing the Printer in the Cut Sheet Feeder Mode, ESC EM software command.
View all Epson LQ-860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
6. Push the paper set levers back until they clamp the paper against the guide rollers. The levers will not close completely if too much paper is used. If this happens, remove some paper from the stack and try again. 7. If you use the double-bin cut sheet feeder, you can select the paper bin number with the control panel on the printer. Press the TEAR OFF button to change between bin 1 and bin 2. The printer beeps once if you select bin 1 and twice for bin 2. (You can also select the bin with the ESC EM software command.) Testing the Printer in the Cut Sheet Feeder Mode When you perform the cut sheet feeder self test, the printer counts the number of lines on the page. As shown below, the number of lines counted is printed out at the bottom of the first test page. This number is the default page-length setting. This setting, however, can be overridden by software commands. 5-10 Using the Printer Options