Epson LQ-860 User Manual - Page 91

Adjusting the Loading Position The Loading Position The loading position is the position of the paper when it has been automatically loaded by the printer. This position is important because it determines where the printing begins on the page. If the printing is too high or too low on the page, change the loading position using the micro-adjustment feature described in the next section. You can set separate loading positions for single sheets, continuous paper, and sheets loaded by the cut sheet feeder. CAUTION: Never use the platen knob to feed paper except in case of a paper jam or other paper feeding problem. (If you need to use the platen knob, make sure the power is off.) If you need to adjust the loading position, always use the micro-adjustment feature. Until the loading position is reset, the printer remembers this position even if it is turned off, and uses it as a reference point for feeding paper. The micro-adjustment feature moves the paper in l/180-inch increments to make fine adjustments to the loading position. You can use this feature to adjust the loading position immediately after loading paper only. Once you have used micro-adjustment to change the loading position of continuous paper, the printer remembers that position even after it is turned off. When you use micro-adjustment to change the loading position of single-sheet paper, however, the printer does not remember this position after the power is turned off. When the power is turned back on, the loading position returns to its factory setting. 3-14 Using the Printer