Epson LQ-860 User Manual - Page 182
Installation, the interface cable from the printer. - emulation
View all Epson LQ-860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Note: Some interfaces may not be available in all countries. All Epson interfaces have the Epson name printed on them. If the board has an identification code printed on it, it is a four-digit number beginning with 8 and should correspond to one of the numbers listed above. Also Coax and Twinax interfaces are available from Epson dealers. These interfaces allow connectivity to mainframes and minicomputers and emulation of IBM printers. Installation The optional interface boards available for your printer are easy to install. The only tool needed is a cross-head screwdriver. Note: Before you use the interface board, make sure your printer's DIP switches are set for parallel interface, even if you are installing a serial interface board. Removing the upper case 1. Turn off the power to the printer and the computer. Next, unplug the power cord from the electrical outlet and disconnect the interface cable from the printer. WARNING: High voltages are present inside the printer when the power is on. Do not attempt to remove the cover unless the printer is turned off and the power cord is unplugged. Also, try not to touch contacts on the circuit board of the printer because many of the components can be destroyed by the static electricity that may build up on your body. Using the Printer Options 5-45