Epson LQ-860 User Manual - Page 152
LOAD/EJECT, BIN 1 BIN 2, TEAR OFF, sheet, the next, the sheet, Software operation
View all Epson LQ-860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
LOAD/EJECT BIN 1 BIN 2 (TEAR OFF) When there is no paper in the printer, press this button to load the paper. (Note that paper loads automatically when you print.) When there is paper in the printer, press this button to eject the sheet. When the printer is on line or off line, press this button to select either bin 1 or bin 2 if you are using a double-bin cut sheet feeder. Software operation The following commands cause the printer to eject the sheet in the printer without loading the next sheet. FF: Form Feed ESC EM R: Ejects a sheet in the cut sheet feeder mode Note: The ESC EM command is a software command used to control the operation of the cut sheet feeder. For more information about this command, see the Command Summary in Chapter 9. If the paper reaches the bottom of the print area when any of the following line feed commands is used, the sheet in the printer is automatically ejected and the next sheet is loaded. LF: Line Feed; advances the paper one line VT: Vertical Tab; advances the paper to the next vertical tab position ESC J: Line feed; advances the paper n/l80th of an inch Software is not effective while the printer is off line. Make sure that the printer is on line if you wish to control the cut sheet feeder using software commands. Using the Printer Options 5-15