Epson LQ-860 User Manual - Page 90
to the loading position before printing the next document. See
View all Epson LQ-860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Interface selection and communications parameters DIP switches 2-3, 2-4, 2-5, and 2-6 select communications parameters that you need to set if you are using the serial interface on the printer. DIP switches 2-3 and 2-4 select the type of interface you are using and the parity setting for the serial interface. DIP switches 2-5 and 2-6 select the baud rate at which the serial port will transmit and receive data. Tear-off mode When DIP switch 2-7 is on, the short tear-off mode is on. This feature automatically advances continuous paper to the tear-off position so you can tear off the page. Then it reverse-feeds the paper to the loading position before printing the next document. See the section on using short tear-off later in this chapter. CAUTION: Do not use the short tear-off mode with labels. Auto line feed When auto line feed is on (DIP switch 2-8 on), each carriage return code (CR) is automatically followed by a line feed code (LF). Using the Printer 3-13