Epson Stylus COLOR 670 Special Edition Printer Basics - Page 37

4. Lift the cartridge out of the printer and dispose of it carefully. 5. Unwrap the new ink cartridge. Then remove only the yellow part of the tape seal on top. You must remove the yellow tape from the top of the cartridge or you will permanently damage it and a printer error will occur. Don't pull off the blue portion or try to remove the clear seal underneath the cartridge. black cartridge (S020187) color cartridge (S020191) 6. Lower the new ink cartridge into its holder with the label facing up and toward the back of the printer. Then press down the ink cartridge clamp until it locks in place, but don't press down on the cartridge itself. Never turn off the printer while the Ppower light is flashing, unless the printer hasn't moved or made noise for more than 5 minutes. 32 7. If you need to replace the other ink cartridge, repeat steps 3 through 6 before continuing with step 8. 8. Press the R cleaning button and close the printer cover. The printer moves the print head and begins charging the ink delivery system. The Ppower light flashes, and the printer makes noise. Charging takes about 30 seconds. When it's finished, the Ppower light stops flashing and stays on.