Epson Stylus COLOR 670 Special Edition Printer Basics - Page 39

load/eject button again and close the printer cover. The, before continuing with step 9.

Get Epson Stylus COLOR 670 Special Edition PDF manuals and user guides View all Epson Stylus COLOR 670 Special Edition manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

5. Unwrap the new ink cartridge. Then remove only the yellow part of the tape seal on top. You must remove the yellow tape from the top of the cartridge or you will permanently damage it and a printer error will occur. Don't pull off the blue portion or try to remove the clear seal underneath the cartridge. Never turn off the printer while the Ppower light is flashing, unless the printer hasn't moved or made noise for more than 5 minutes. black cartridge (S020187) color cartridge (S020191) 6. Lower the new ink cartridge into its holder with the label facing up and toward the back of the printer. Then press down the ink cartridge clamp until it locks in place, but don't press down on the cartridge itself. 7. If you need to replace the other ink cartridge, repeat steps 3 through 7 before continuing with step 9. 8. Press the E load/eject button again and close the printer cover. The printer moves the print head and begins charging the ink delivery system. The Ppower light flashes and the printer makes noise. Charging takes about 30 seconds. When it's finished, the Ppower light stops flashing and stays on. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
34
5.
Unwrap the new ink cartridge. Then remove
only
the yellow part of
the tape seal on top.
6.
Lower the new ink cartridge into its holder with the label facing up
and toward the back of the printer. Then press down the ink cartridge
clamp until it locks in place, but don’t press down on the cartridge
itself.
7.
If you need to replace the other ink cartridge, repeat steps 3 through 7
before continuing with step 9.
8.
Press the
E
load/eject button again and close the printer cover. The
printer moves the print head and begins charging the ink delivery
system.
The
P
power light flashes and the printer makes noise. Charging
takes about 30 seconds. When it’s finished, the
P
power light stops
flashing and stays on.
You must remove the
yellow tape from the top
of the cartridge or you will
permanently damage it
and a printer error will
occur. Don’t pull off the
blue portion or try to
remove the clear seal
underneath the cartridge.
Never turn off the printer
while the
P
power light is
flashing, unless the printer
hasn’t moved or made
noise for more than
5 minutes.
black cartridge
(S020187)
color cartridge
(S020191)