Epson TM-m50II Web Config Reference Guide

Epson TM-m50II Manual

Get Epson TM-m50II PDF manuals and user guides View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals

Epson TM-m50II manual content summary:

  • Epson TM-m50II | Web Config Reference Guide - Page 1
    Web Config Reference Guide TM-P20II TM-P80II TM-m30III TM-m30III-H TM-m50II M00152102 Rev.C
  • Epson TM-m50II | Web Config Reference Guide - Page 2
    with Seiko Epson Corporation's operating and maintenance instructions.  Seiko Epson Corporation shall not be liable against any damages or problems arising from purpose only. ©Seiko Epson Corporation 2022-2023. About this Manual Key to Symbols The symbols in this manual are identified by their
  • Epson TM-m50II | Web Config Reference Guide - Page 3
    Using Web Config Web Config is a printer's built-in web page that allows you to check and change printer settings on your browser. To use Web Config, you need to set your computer's IP address to the same segment as the printer. How to Start Web Config 1. Start your web browser on a computer or
  • Epson TM-m50II | Web Config Reference Guide - Page 4
    a warning will appear in the browser when Web Config is started. Printers This document covers WebConfig for the following printers.  TM-P20II  TM-P80II  TM-m30III  TM-m30III-H  TM-m50II For more information about the functions of each printer, see Chapter 12, "List of Functions by Model". 4
  • Epson TM-m50II | Web Config Reference Guide - Page 5
    TABLE OF CONTENTS Cautions ...2 Trademarks ...2 About this Manual...2 Key to Symbols ...2 Using Web Config ...3 How to Start Web Config ...3 Printers ...4 TABLE OF CONTENTS ...5 1. Introduction...9 1.1 Definitions...9 1.2 Terminologies ...9 2. Supported Web Browsers...10 3. Layout ...10
  • Epson TM-m50II | Web Config Reference Guide - Page 6
    Setting Page ...36 10.1 Status ...36 10.1.1 Product Status ...36 10.1.1.1 Top Page...36 10.1.2 Network Status ...41 10.1.2.1 Top Page...41 10.1.3 TM-Intelligent ...47 10.1.3.1 Top page...47 10.2 Print ...48 10.2.1 Print Settings...48 10.2.1.1 Top Page...48 10.2.1.2 Result Page ...49 10
  • Epson TM-m50II | Web Config Reference Guide - Page 7
    and Time ...150 10.6.4.1 Display Format ...150 10.6.4.2 Date and Time ...152 10.6.4.3 Time Difference ...154 10.6.4.4 Time Server ...156 11. TM-i Settings...161 11.1 Basic ...161 11.1.1 Image ...161 11.1.2 Display Items...161 11.2 Printer ...162 11.2.1 Image ...162 11.2.2 Display Items
  • Epson TM-m50II | Web Config Reference Guide - Page 8
    11.6 Status Notification...166 11.6.1 Image ...166 11.6.2 Display Items...166 11.7 Proxy ...167 11.7.1 Image ...167 11.7.2 Display Items...167 11.8 Reset...168 11.8.1 Image ...168 11.8.2 Display Items...168 11.9 Help ...169 11.9.1 Image ...169 11.9.2 Display Items...169 12. List of
  • Epson TM-m50II | Web Config Reference Guide - Page 9
    is applied to the EPSON Web Config function (hereafter called "Web Config"). 1.1 Definitions In this guide, words and phrases enclosed in double-quotation marks ("") are strings that are shown in Web Config. 1.2 Terminologies Terms Button Text box Check box Tab Radio
  • Epson TM-m50II | Web Config Reference Guide - Page 10
    the following platforms and web browsers. Table 2-1 Supported Web Browsers Platforms Web Browsers Windows 11, Windows 10, Windows 8.1, Windows 8, IE8, IE9, IE10, IE11 700px or less, it will be displayed in the configuration for smartphones. EPSON Logo Logoff Icon Product Name Display Area 10
  • Epson TM-m50II | Web Config Reference Guide - Page 11
    is larger than 700px, it will be displayed in the configuration for PC. EPSON Logo Logoff Icon Product Name Display Area Parts EPSON Logo Product Name Logoff Icon Display Area Description Displays an image of the EPSON Logo. Click the EPSON Logo to access the top page of Web Config. The top page
  • Epson TM-m50II | Web Config Reference Guide - Page 12
    Logo Product Name User Authentication Tab Menu Sub Menu Display Area Figure 3-1 Layout Table 3-1 Layout Parts Description EPSON Logo Displays an image of the EPSON Logo. Product Name Displays the product name. User Authentication This link allows the user to log on/off. When the user logs
  • Epson TM-m50II | Web Config Reference Guide - Page 13
    4. Language 4.1 All Supported Languages Table 4-1Supported Languages SKU Languages Japanese / Basic English / French / German / Italian / Spanish / Portuguese 4.2 Spec of Language Language English Language which is setup on the
  • Epson TM-m50II | Web Config Reference Guide - Page 14
    6. Administrator Password Settings When accessing Web Config, if the administrator password has not been set, go to the Set Administrator Password page. 6.1 Top Page 6.1.1 Image Setting Items Button Figure 6-1 Administrator Password Settings 6.1.2 Setting Items The following table shows the
  • Epson TM-m50II | Web Config Reference Guide - Page 15
    7. User Authentication 7.1 Authentication Method Web Config uses the administrator user name and password to perform user authentication. This same password is also used for locking the device's control panel and for EpsonNet Config password authentication. If a password is not configured,
  • Epson TM-m50II | Web Config Reference Guide - Page 16
    7.3 Log on Page 7.3.1 Image The following figure shows the layout of the logon page. Input Items Button Figure 7-1 Log on Page 7.3.2 Input Items Items "Current password" "Note: It is recommended to communicate via HTTPS for entering an administrator password." Table 7-3 Input Items Description
  • Epson TM-m50II | Web Config Reference Guide - Page 17
    the entered password is incorrect. This item is displayed in red letters. This item is displayed when administrator logon fails on devices that do not support user names. This message is displayed when registered user logon fails. This item is displayed in red letters. 17
  • Epson TM-m50II | Web Config Reference Guide - Page 18
    8. Common Specifications 8.1 Password Entry Field The common specifications for password entry fields are shown below.  Entered characters are masked. To use textbox, specify the "password" attribute for "type".  When a password is set, 10 asterisks (*) are used for the "value" attribute for the
  • Epson TM-m50II | Web Config Reference Guide - Page 19
    9. Basic Settings Page 9.1 Log on Page 9.1.1 Top Page 9.1.1.1 Image 9.1.1.1.1 Configuration for Smartphones Display Items 9.1.1.1.2 Configuration for PC Display Items 19
  • Epson TM-m50II | Web Config Reference Guide - Page 20
    Setting Items are displayed when multiple display languages are supported. The language specification is in accordance with section 4, on the selected language. 9.1.1.3 Network Status Information Only TM-P20II and TM-P80II are displayed. Table 9-1 Network Status Information Items Description
  • Epson TM-m50II | Web Config Reference Guide - Page 21
    9.2 Log on Page 9.2.1 Image The following figure shows the layout of a log on page. Input Items Button 9.2.2 Input Items Items "Current password" "Note: It is recommended to communicate via HTTPS for entering an administrator password." Figure 9-1 Log on Page Table 9-2 Input Items Description
  • Epson TM-m50II | Web Config Reference Guide - Page 22
    This message is shown when the entered password is incorrect. This item is displayed in red. This item is displayed on a device which does not support username and when administrator log on fails. This message is shown when registered user log on fails. This item is displayed in red. 22
  • Epson TM-m50II | Web Config Reference Guide - Page 23
    Items 9.4.1.3 Button "OK" "Back" Items Buttons Table 9-5 Setting Items Description Selects the SSID found in the SSID search and the - manual option using the radio buttons. Condition Table 9-6 Button Description Moves to the configuration page for SSID connection. - Button to move to
  • Epson TM-m50II | Web Config Reference Guide - Page 24
    9.4.2.3 Button "OK" "Cancel" Items Buttons Table 9-7 Setting Items Description If selected from a list, the selected SSID is displayed as a fixed string. If manual, use the text box to configure the settings. A text box is provided. The string must have 0, 5, or 8 to 63 characters. (ASCII codes
  • Epson TM-m50II | Web Config Reference Guide - Page 25
    9.4.3 Result Page 9.4.3.1 Image Setting Result Figure 9-2 Result Page 9.4.3.2 Setting Result Table 9-9 Setting Result Items Description "Communication is restarting.¥n This text is shown if setup is successful. Restarting communication may take a few minutes. If you want to change the
  • Epson TM-m50II | Web Config Reference Guide - Page 26
    9.5 Wi-Fi Direct Page 9.5.1 Top Page 9.5.1.1 Image Setting Items Buttons 9.5.1.2 Setting Items Items "Wi-Fi Direct" "The number of connected devices" Table 9-11 Setting Items Description Two radio buttons are provided to choose either of the following: "Enable" / "Disable" Displays the number of
  • Epson TM-m50II | Web Config Reference Guide - Page 27
    9.5.2 Result Page 9.5.2.1 Image Setting Result Figure 9-3 Result Page 9.5.2.2 Setting Result Table 9-13 Setting Result Items Description "Applying the settings.¥n This text is shown if setup is successful. Restarting communication may take a few minutes. If you want to change the settings,
  • Epson TM-m50II | Web Config Reference Guide - Page 28
    Setting Items Description Use the drop-down list to select from the following options: "Max" / " Recommendation " / "None" Title For models that support the maximum printing speed "Level10" Use the drop-down list to select from the following options: " Level1 (slow)" / "Level2" / "Level3" / "Level4
  • Epson TM-m50II | Web Config Reference Guide - Page 29
    . User can select "Off" / "Once" by radio button. Displayed only on models that support Print Density Displayed only on models that support command execution during offline Displayed only on models that support the USB power saving function This item is displayed on devices with a buzzer. This item
  • Epson TM-m50II | Web Config Reference Guide - Page 30
    9.6.2 Result Page The result message is shown in the main frame after the "OK" button is pressed. 9.6.2.1 Image The following figure shows the layout of the results page. Setting Result Figure 9-5 Image 9.6.2.2 Setting Result Items "Restarting... Restarting communication may take a few minutes. If
  • Epson TM-m50II | Web Config Reference Guide - Page 31
    9.7 Firmware Update Page 9.7.1 Top Page 9.7.1.1 Image Display Items Description Button Figure 9-6 Top Page 9.7.1.2 Display Items "Current Version" Items Table 9-20 Display Items Description Up to 12 characters in ASCII codes XX.YY.ZZZZZZ -XX: Linux Kernel version -YY: Linux Appli version -
  • Epson TM-m50II | Web Config Reference Guide - Page 32
    9.7.2 Firmware Search Process Page The page is shown after the 'Start' button is pressed. The following figure shows a layout of the firmware search page. 9.7.2.1 Image Description Button Figure 9-7 Firmware Search Process Page 9.7.2.2 Description Items Items "Checking the firmware." "Checking
  • Epson TM-m50II | Web Config Reference Guide - Page 33
    THE UNITED STATES, YOU AGREE TO IMPORTANT LEGAL TERMS AND CONDITIONS, INCLUDING A CLASS ACTION WAIVER AND ARBITRATION. PLEASE READ CAREFULLY: https://support.epson.net/eula/" "Accept" Check box. Check this item to enable the "Start" button. 9.7.3.3 The Information of the Firmware Update Table
  • Epson TM-m50II | Web Config Reference Guide - Page 34
    9.7.4 Cancel Process Page 9.7.4.1 Image Description 9.7.4.2 Description Items "Canceling the firmware update." 9.7.4.3 Button "Refresh" Items 9.7.5 Result Page 9.7.5.1 Image Button Figure 9-9 Cancel Process Page Table 9-28 Description Fixed Strings Description Table 9-29 Button
  • Epson TM-m50II | Web Config Reference Guide - Page 35
    version of the firmware is the most recent. "Cannot connect to the Epson server." This message is shown when the printer could not access the loaded. " is shown on destinations lights indicate an error, solve the problem." with roll paper feed. "Note: There might be an error regarding the
  • Epson TM-m50II | Web Config Reference Guide - Page 36
    10. Display or Setting Page 10.1 Status 10.1.1 Product Status 10.1.1.1 Top Page 10.1.1.1.1 Image Display Items Button Figure 10-1 Product Status 10.1.1.1.2 Display items 10.1.1.1.2.1 Display Language Setting The language specification is in accordance with Section 4 Language. When a language is
  • Epson TM-m50II | Web Config Reference Guide - Page 37
    shown right behind the message. The string is shown in red. A link to a Panel Snapshot Page is indicated. "Fax(G3-1) is out of order. Contact Epson Support. " This message is shown when only G3-1 is out of order. The "Panel Snapshot" string is shown in red. A link to a Panel Snapshot Page is
  • Epson TM-m50II | Web Config Reference Guide - Page 38
    be used because there is a problem with the printer. Contact Epson Support." "Panel Snapshot" "PDL board is out of order. Contact Epson Support. " "Panel Snapshot" "PS board is out of order. Contact Epson Support." "Panel Snapshot" "There is a problem with PS board. Reset PS board after shut down
  • Epson TM-m50II | Web Config Reference Guide - Page 39
    "There are problems with x parts of the hardware. (Detail)" "Panel Snapshot" This message either wired LAN, wireless LAN (infrastructure), or Wi-Fi Direct). Condition - For models that support the initial value for the administrator password, this is displayed only when the administrator is logged
  • Epson TM-m50II | Web Config Reference Guide - Page 40
    10.1.1.1.2.5 Administrator Information Table 10-7 Administrator Information Items Description "Administrator Name/Contact Information" Shows contact information (name, phone number, etc.) that the user of the printer can use. 10.1.1.1.2.6 Software Licenses Web Config shows this page when the
  • Epson TM-m50II | Web Config Reference Guide - Page 41
    and "Wi-Fi Direct" tabs are displayed on model that support wireless functions. You can switch between both sets of displayed BOOTP" "Excellent" / "Good" / "Fair" / "No Good" / "Unknown" "Auto" / "Manual" "Enable" / "Disable" Only shown when wireless LAN is used. Not shown while Wi-Fi Direct is
  • Epson TM-m50II | Web Config Reference Guide - Page 42
    ASCII codes) "Proxy Server Password" "Not Set "IPv6 Setting" "IPv6 Privacy Extension" "Enable" / "Disable" "Enable" / "Disable" If "Obtain IP Address" is "Manual", this item is not shown. Not shown when Connection Status is disabled. Not shown when Connection Status is disable. Not shown when
  • Epson TM-m50II | Web Config Reference Guide - Page 43
    DNS Server" "Wi-Fi Setup" "Wi-Fi Mode" "SSID" "Channel" Shows an IPv6 address default gateway. "AOSS" / "WPS" / "Manual" / "Wi-Fi Auto Connect" / "Epson iPrint" "IEEE802.11b" / "IEEE802.11g" / "IEEE802.11b/g" / "IEEE802.11b/g/n"/ "IEEE802.11a/n/ac" 1 - 32 characters Alphanumeric and sign characters
  • Epson TM-m50II | Web Config Reference Guide - Page 44
    currently used. - Condition "Connection Method" "IP Address" "Subnet Mask" "Default Gateway" "The number of connected devices" "SSID" "Not Set"/"Simple AP" "Auto"/"Manual" and IP address are displayed. The IP address is in the following format: "xxx.xxx.xxx.xxx". xxx: 0 - 255 in decimals "xxx
  • Epson TM-m50II | Web Config Reference Guide - Page 45
    / "Unknown" "Excellent" / "Good" / "Fair" / "No Good" / "Unknown" "Auto" / "Manual" "Enable" / "Disable" "Enable" / "Disable" Only shown when wireless LAN is used. Not shown while Wi- enabled. Not shown if the DHCPv6 function is not supported. Shown if the IPv6 Setting is used. Shown if the IPv6
  • Epson TM-m50II | Web Config Reference Guide - Page 46
    address Shows an IPv6 stateless address Shows an IPv6 address Shows an IPv6 address "AOSS" / "WPS" / "Wi-Fi Direct" / " Manual" / "Wi-Fi Auto Connect" / "Epson iPrint" "IEEE802.11b" / "IEEE802.11g" / "IEEE802.11b/g" / "IEEE802.11b/g/n" Range of 0 to 4 in decimals 1~32 characters Alphanumeric and
  • Epson TM-m50II | Web Config Reference Guide - Page 47
    10.1.3 TM-Intelligent It is possible to establish a link to TM-i. 10.1.3.1 Top page Click a menu item to open the TM-i Settings page in a new tab. (See "TM-i Settings" for more information.) 10.1.3.1.1 Image Links Figure 10-3 Top page 47
  • Epson TM-m50II | Web Config Reference Guide - Page 48
    -13 Setting Items Description Use the drop-down list to select from the following options: "Max" / "Recommendation" / "None" Title For models that support the maximum printing speed "Level10" Use the drop-down list to select from the following options: "Level1 (slow)" / "Level2" / "Level3" / "Level4
  • Epson TM-m50II | Web Config Reference Guide - Page 49
    "Off" / "Once" by radio button. User can select "Off" / "Once" by radio button. Display only on models that support Command execution during offline Display only on models that support Power saving function for USB This item is displayed on devices with a buzzer. This item is displayed on devices
  • Epson TM-m50II | Web Config Reference Guide - Page 50
    10.2.1.2.1 Image The following figure shows the layout of the results page. Setting Result Figure 10-5 Image 10.2.1.2.2 Setting Result Items "Restarting... Restarting communication may take a few minutes. If you want to change the settings, reconnect to the Web Config." "Setup failed." "Cannot
  • Epson TM-m50II | Web Config Reference Guide - Page 51
    "Enable" / "Disable" Two radio buttons are provided to choose one of the following: Condition - - - This item is displayed only for models that support IP address printing. - If "Obtain IP Address" is "Manual", this item is grayed-out. This item is not displayed on CIJ. - If "Obtain IP Address" is
  • Epson TM-m50II | Web Config Reference Guide - Page 52
    broadcast address("255.255.255.255") Two radio buttons are provided to choose one of the following: "Auto" / "Manual" "Manual" is selected when "Obtain IP Address" is "Manual". A text box is provided. Format: "xxx.xxx.xxx.xxx" "xxx": "0"~"255" in decimals. ("0.0.0.0") is prohibited. If "Primary DNS
  • Epson TM-m50II | Web Config Reference Guide - Page 53
    - - If "IPv6 Setting" is "Disable", this item is grayed-out. - If "IPv6 Setting" is "Disable", this item is greyed-out. - Only DHCPv6 support printers. - If "IPv6 Setting" is "Disable", this item is greyed-out. "IPv6 Address Default Gateway" "IPv6 Link-Local Address" "IPv6 Stateful Address " "IPv6
  • Epson TM-m50II | Web Config Reference Guide - Page 54
    "IPv6 Secondary DNS Server" "Power Saving(Wi-Fi)" "Frequency Range (Wi-FiWi-Fi Direct)" "Frequency Range" Set this item in the IPv6 address. Use one of the following formats. xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxxx:xxxx "xxxx"
  • Epson TM-m50II | Web Config Reference Guide - Page 55
    10.3.1.2 Confirm Page 10.3.1.2.1 Image Input Information Button Figure 10-7 Confirm Page 10.3.1.2.2 Input Information Table 10-20 Input Information Items Description "Confirm the following settings." This message is shown at the top of the page, followed by the setting items and their
  • Epson TM-m50II | Web Config Reference Guide - Page 56
    10.3.1.3 Result Page The following figure shows the page that is displayed after the network settings are processed. The content of the Result page will vary based on the result (success or failure). 10.3.1.3.1 Image Setting Results Figure 10-8 Result Page 10.3.1.3.2 Setting Result Table 10-22
  • Epson TM-m50II | Web Config Reference Guide - Page 57
    10-9 Wi-Fi Setup Top Page 10.3.2.1.2 Network Information Display same contents as Network Status of Status tab. 10.3.2.1.3 Button The following buttons are supported. Items "Setup" Table 10-23 Button Description This button is used to begin Wi-Fi setup. If pressed, Web Config goes to the SSID
  • Epson TM-m50II | Web Config Reference Guide - Page 58
    Settings page as below. You can choose a SSID on the searched SSID list by choosing a radio button or choose a radio button to specify any SSID manually. 10.3.2.3.1 Image SSID List Figure 10-11 Wi-Fi Settings Page Refresh Button SSID
  • Epson TM-m50II | Web Config Reference Guide - Page 59
    If Security Level is WEP-64bit or WEP-128, "Unknown" is shown (because a printer can not recognize 64bit or 128bit). 10.3.2.3.3 SSID Manual Input You can specify any SSID manually. "Enter SSID" Items Table 10-26 SSID Manual Input Description A text box is provided so the user can enter an SSID
  • Epson TM-m50II | Web Config Reference Guide - Page 60
    When the "Apply" button is pressed, Web Config displays a pop-up window that shows the following message if it recognizes an error in the entered value. Table 10-30 Error Pop-up Items Description "Invalid value below." This message is shown when the value entered for SSID, Password, or
  • Epson TM-m50II | Web Config Reference Guide - Page 61
    10.3.2.4.3 Button There is a button to proceed to Wi-Fi Setup based on the values entered on the Confirm Wi-Fi Setup page, and a button to go back to the previous page. "OK" "Back" Items Table 10-33 Button Description This button is used to go forward with Wi-Fi Setup based on the values entered
  • Epson TM-m50II | Web Config Reference Guide - Page 62
    10.3.3 Wired LAN Only models that support wired LAN are displayed. 10.3.3.1 Top page 10.3.3.1.1 Image Setting Items Button Figure 10-14 Top page 10.3.3.1.2 Setting Items The following table shows the
  • Epson TM-m50II | Web Config Reference Guide - Page 63
    10.3.3.2.2 Input Information Table 10-37 Input Information Items Description "Confirm the following settings." This message is shown at the top of the page, followed by the setting items and their values. "Communication will be shut down temporarily This message is shown at the bottom of the
  • Epson TM-m50II | Web Config Reference Guide - Page 64
    the Wi-Fi Direct connection and change the settings. Only models that support wireless LAN are displayed. 10.3.4.1 Top Page 10.3.4.1.1 Image Setting of the text box. Displays only models equipped with Wi-Fi chip. "DIRECT-TM-" + the character string entered in this text box becomes the SSID name.
  • Epson TM-m50II | Web Config Reference Guide - Page 65
    are provided to choose one of the following: "Auto" / "Manual" When "manual" is selected, a text box for entering an IP address is disabled, the default value is displayed for the setting value if the IP address is set manually. Otherwise, it is blank. If "Wi-Fi Direct" is "Disable", this item is
  • Epson TM-m50II | Web Config Reference Guide - Page 66
    10.3.4.2 Confirm Page 10.3.4.2.1 Image Display Items Button Figure 10-18 Confirm Page 10.3.4.2.2 Display Items The settings that were entered on the previous page are shown for confirmation after the "Change the following settings" message. The following message is shown below the confirmed
  • Epson TM-m50II | Web Config Reference Guide - Page 67
    name, consisting of the device name and '.local'. Use the edit box to set the bonjour service name. The string must have up to 41 alphanumeric characters (0x20 ~ 0x7E). Shows the " is checked. Read only Only RAW (Port9100) and IPP support products. Can be entered, when "Use Bonjour" is checked. 67
  • Epson TM-m50II | Web Config Reference Guide - Page 68
    whether or not to enable iBeacon . Title Use the check box to choose whether or not to enable SLP. Title Only printers that support iBeacon Only iBeacon support printers - - "Enable WSD" Use the check box to choose whether or not to enable WSD. "Scanning Timeout (sec)" Use the edit box to
  • Epson TM-m50II | Web Config Reference Guide - Page 69
    ) Can be entered, when "Allow RAW (Port9100) Printing" is checked. Only SNMPv3 support printer. This item is displayed when the device supports SNMPv3 function and not support SNMPv1/v2c Individual Setting. Only SNMPv3 support printer. Can be entered, when "Enable SNMPv1/v2c" is checked. Only SNMPv3
  • Epson TM-m50II | Web Config Reference Guide - Page 70
    version is displayed. A-Z, a-z, 0-9 and underscore, period, and hyphen character. You can set the Device ID using the text box. Same as Password. Only SNMPv3 support printer. Can be entered, when "Enable SNMPv3" is checked. This item is displayed on devices which have ePOS-Print Lite. This item is
  • Epson TM-m50II | Web Config Reference Guide - Page 71
    10.4.1.2 Confirmation Page 10.4.1.2.1 Image Setting Items Button Figure 10-21 Confirmation Page 10.4.1.2.2 Setting Items The settings entered on the previous page are shown for confirmation, after the message "Change the following settings". The following message is shown below the confirmed
  • Epson TM-m50II | Web Config Reference Guide - Page 72
    10.4.1.3 Result Page 10.4.1.3.1 Image Setting Result Figure 10-22 Result Page 10.4.1.3.2 Setting Result Table 10-50 Setting Result Items Description "Shutting down." -This message is shown when the settings are "Restarting communication may take a few minutes." completed. "If you want to
  • Epson TM-m50II | Web Config Reference Guide - Page 73
    10.4.2 CA Certificate 10.4.2.1 Top Page On the CA Certificate top page, you can import, display, and delete CA Certificate. If importing or deleting is successful, this page is shown. The following figure shows the layout of the CA Certificate top page. 10.4.2.1.1 Image The following figure shows
  • Epson TM-m50II | Web Config Reference Guide - Page 74
    10.4.2.1.4 Button "Import" Items "Delete" "Reboot Network" Table 10-53 Button Description Button used to import CA certificate Button used to delete the imported CA certificate Button used to reboot network functions Condition This button is shown when CA Certificate is not imported. This
  • Epson TM-m50II | Web Config Reference Guide - Page 75
    10.4.2.2 Import Page The page is shown after the 'Import' button is pressed. The following figure shows the layout of the page for importing the CA certificate into the printer. 10.4.2.2.1 Image Setting Items Note Button 10.4.2.2.2 Setting Items "CA Certificate" Items Figure 10-24 Import Page
  • Epson TM-m50II | Web Config Reference Guide - Page 76
    10.4.2.3 Result Page After the "Import" button is pressed, the top page is shown in the main frame if importing is successful. After the "Import" button is pressed, the result is shown in the main frame if importing fails. 10.4.2.3.1 Image Setting Result Figure 10-25 Result Page 10.4.2.3.2 Setting
  • Epson TM-m50II | Web Config Reference Guide - Page 77
    Web Config downloads a root certificate file from the server provided by Epson and updates the printer files. 10.4.3.1.1 Image Display Items Button 10-61 Description Items "Update the root certificate to use cloud services." Fixed Strings Description 10.4.3.1.3 Button "Start" Items Table 10
  • Epson TM-m50II | Web Config Reference Guide - Page 78
    10.4.3.2 Progress Page 10.4.3.2.1 Image 10.4.3.2.2 Button "Refresh" Items 10.4.3.3 Result Page 10.4.3.3.1 Image Button Figure 10-27 Progress Page Table 10-63 Button Description Moves to the results page if the search is completed or remains on the current page if the search has not been
  • Epson TM-m50II | Web Config Reference Guide - Page 79
    10.4.3.3.2 Result "Setup complete." Items " You have the latest root certificate." " Cannot connect to the Epson server." " The operation failed." Table 10-64 Result Description This message is shown when the settings are completed. The root certificate is most recent. The
  • Epson TM-m50II | Web Config Reference Guide - Page 80
    10.4.4 SSL/TLS In the SSL/TLS settings area, you can configure the settings related to the HTTP server the printer supports. "Basic" "Certificate" Table 10-65 Sub menu Sub menu 10.4.4.1 Basic 10.4.4.1.1 Top Page 10.4.4.1.1.1 Image The following figure shows the layout of the top
  • Epson TM-m50II | Web Config Reference Guide - Page 81
    10.4.4.1.2 Confirming Page The confirmation page appears when the "Next" button is pressed on the previous settings page. 10.4.4.1.2.1 Image Setting Items Button Figure 10-30 Confirming Page 10.4.4.1.2.2 Setting Items The settings entered on the previous page are shown for confirmation, after the
  • Epson TM-m50II | Web Config Reference Guide - Page 82
    10.4.4.1.3 Result Page The following result is shown in the main frame after the "OK" button is pressed. 10.4.4.1.3.1 Image Setting Result Figure 10-31 Result Page 10.4.4.1.3.2 Setting Result Table 10-69 Setting Result Items Description "Shutting down." -This message is shown when the
  • Epson TM-m50II | Web Config Reference Guide - Page 83
    10.4.4.2 Certificate 10.4.4.2.1 Top Page 10.4.4.2.1.1 Image The following figure shows the layout of the top page. Button Setting Items Figure 10-32 Top Page 10.4.4.2.1.2 Setting Items You can choose the certificate used for the SSL/TLS connection. Table 10-70 Setting Items Items Description
  • Epson TM-m50II | Web Config Reference Guide - Page 84
    "Self-signed Certificate" "Update" "Confirm" "Download" - Button for moving to the settings page to update the self-signed certificate If the date and time are not adjusted in the printer, the following message is shown in the main frame. "Invalid Date and Time." - Button for moving to the
  • Epson TM-m50II | Web Config Reference Guide - Page 85
    "Password" "CA Certificate 1" "CA Certificate 2" -Enter the passphrase for encryption to create a private key. Usable string: ASCII code (0x20-0x7E) Max of 48 characters. -Enter the file of the certificate signed by CA issuing the server certificate to import it into the printer. You can also use
  • Epson TM-m50II | Web Config Reference Guide - Page 86
    10.4.4.2.3 Confirm for CA-signed Certificate This page is shown after 'Confirm' for the import is pressed in the CA-signed certificate settings. The following figure shows the layout of the page for confirming imported certificates. 10.4.4.2.3.1 Confirm Page 10.4.4.2.3.1.1 Image Display Items
  • Epson TM-m50II | Web Config Reference Guide - Page 87
    10.4.4.2.4 Generate CSR(Certificate Signing Request) 10.4.4.2.4.1 Generate Top Page This page is shown after 'Generate' for importing in the CSR settings is pressed. The following figure shows the layout of the page for generating CSR. 10.4.4.2.4.1.1 Image Setting Items Button Figure 10-35
  • Epson TM-m50II | Web Config Reference Guide - Page 88
    10.4.4.2.4.1.3 Button "OK" "Back" Items Table 10-78 Button Description - Button for generating CSR at the bottom of the main frame -Button at the bottom of the main frame for going back to the top page of the certificate settings. When the "Generate" button is pressed, Web Config displays a pop-
  • Epson TM-m50II | Web Config Reference Guide - Page 89
    address, IPv6 address, host name, or FQDN format. Commas (",")(0x2c) have a special meaning as control characters. See the NOTE below. "Organization" "SEIKO EPSON CORP." -Fixed "Valid Date (UTC)" Shows the date and time for the client "Certificate Validity (year)" Use the drop-down list to
  • Epson TM-m50II | Web Config Reference Guide - Page 90
    10.4.4.2.6.2 Confirm Settings Page The confirmation page appears when the self-signed certificate is changed. 10.4.4.2.6.2.1 Image Setting Items Button Figure 10-37 Confirm Settings Page 10.4.4.2.6.2.2 Setting Items The settings entered on the previous page are shown for confirmation, after the
  • Epson TM-m50II | Web Config Reference Guide - Page 91
    10.4.4.2.7 Confirm for the Self-signed Certificate This page is shown after 'Confirm' for the import is pressed in the self-signed certificate settings. The following figure shows the layout of the page for confirming certificates. 10.4.4.2.7.1 Confirm Top Page 10.4.4.2.7.1.1 Image Display Items
  • Epson TM-m50II | Web Config Reference Guide - Page 92
    10.4.5 IPsec/IP Filtering In the IPsec/IP Filtering settings area, you can configure the settings related to IPsec/IP Filtering. "Basic" "Client Certificate" Table 10-88 Sub menu of IPsec Sub menu 10.4.5.1 Basic You can configure the default policy and group policies for IPsec/IP Filtering in the
  • Epson TM-m50II | Web Config Reference Guide - Page 93
    10.4.5.1.1.1.2 Setting Items of Default Policy The following figure shows the layout of this settings area. Items "Each policy is applied with following priorities:" "Group Policy 1 > Group Policy 2 > ... > Group Policy 10 > Default Policy" "IPsec/IP Filtering" "Default Policy" Table 10-89
  • Epson TM-m50II | Web Config Reference Guide - Page 94
    "ID" "Pre-Shared Key" "Confirm Pre-Shared Key" The values that can be entered depends on the selection for "ID Type cannot be used as the first character, regardless of the type selected. "Distinguished Name": ASCII, 1-255 characters. Must use [=]. "IP Address": IPv4, IPv6 "FQDN": ASCII (
  • Epson TM-m50II | Web Config Reference Guide - Page 95
    "Remote Gateway(Tunnel Enter an IPv4 address or IPv6 address. Mode)" Max of 39 characters. "Security Protocol" Use the drop-down list to make a choice. "ESP" / "AH" If "IPsec/IP Filtering" is "Enable" , "Access Control" is "IPsec" and "Encapsulation" is "Tunnel Mode" ,it is possible to set this
  • Epson TM-m50II | Web Config Reference Guide - Page 96
    . - "Authentication" Use the drop-down list to choose from the following.. Support algorithms refer to the Network Functional Specifications. "SHA-1" / "SHA-256" / Remote Address (Host) is incorrect." "Select 1 to 10 service names." "Pre-shared keys you entered do not match." Displayed if there
  • Epson TM-m50II | Web Config Reference Guide - Page 97
    -Permit Access or Refuse Access Permit Access or Refuse Access Local Address (Printer/Scanner) IPv4 fe80::~ Except fe80::~ Any * (Specify IP Adress)IPv4  - -  (Specify IP Adress) fe80::~ -  - - (Specify IP Adress)fe80::~ - -   Remote Address (Host) (Specify IP Adress Range
  • Epson TM-m50II | Web Config Reference Guide - Page 98
    10.4.5.1.1.2 Group Policy 10.4.5.1.1.2.1 Image The following figure shows the layout of the Setting Items on the Group Policy page. Setting Items Button Figure 10-41 Group Policy of IPsec Basic Top Page 10.4.5.1.1.2.2 Setting Items of Group Policy The following figure shows a layout of this
  • Epson TM-m50II | Web Config Reference Guide - Page 99
    "HTTP (Local)"/ "HTTPS (Local)"/ "HTTP (Remote)"/ "HTTPS (Remote)" - If "Enable this Group Policy" is enabled and "Method of Choosing PORT" is "Service Name", it is possible to configure this item. If the printer has these features, they can be selected. -LPR function "LPR" - RAW (Port9100)function
  • Epson TM-m50II | Web Config Reference Guide - Page 100
    "Remote Port" "IKE Version" "Authentication Method" "Pre-Shared Key" "Confirm Pre-Shared Key" "Local" "Authentication Method" "ID Type" "ID" "Pre-Shared Key" "Confirm Pre-Shared Key" "Remote" "Authentication Method" Enter up to 60 characters. Numbers, commas, spaces, and empty strings can be input.
  • Epson TM-m50II | Web Config Reference Guide - Page 101
    "ID Type" "ID" "Pre-Shared Key" "Confirm Pre-Shared Key" "Encapsulation" "Remote Gateway(Tunnel Mode)" "Security Protocol" "Algorithm Settings" Use the drop-down list to make a choice. "Distinguished Name" / "IP Address" / "FQDN" / "Email Address" / "Key ID" The values that can be entered depends
  • Epson TM-m50II | Web Config Reference Guide - Page 102
    "Encryption" for "ESP" is "AES-GCM-128", "AES-GCM-192", or "AES-GCM-256". - Use the drop-down list to choose from the following.. Support algorithms refer to the Network Functional Specifications. "SHA-1" / "SHA-256" / "SHA-384" / "SHA-512" / "MD5" / "Any" This item is enabled when "Enable this
  • Epson TM-m50II | Web Config Reference Guide - Page 103
    Scanner) and Remote Address (Host) is incorrect." "Select 1 to 10 service names." "Pre-shared keys you entered do not match." - Displayed if there are 0 or 11 or more checks for "Service Name". - Displayed if the values you entered for the Pre-shared keys
  • Epson TM-m50II | Web Config Reference Guide - Page 104
    10.4.5.1.2 Confirm IPsec Settings Page If the Next button is pressed on the IPsec Group Settings page, Web Config goes to the Confirm IPsec Group Policy Settings page. 10.4.5.1.2.1 Image Input Items Button Figure 10-42 Confirm IPsecDefault Policy Settings Page 10.4.5.1.2.2 Input Information Items
  • Epson TM-m50II | Web Config Reference Guide - Page 105
    "If connection is lost unintentionally, initialize the network settings on the product's control panel. And then configure it again." This message is shown on the bottom of the page. < The case of scanner with LCD panel > "If connection is lost
  • Epson TM-m50II | Web Config Reference Guide - Page 106
    10.4.5.1.2.4 Result Page The following figure shows the page that is displayed after the network settings are processed. The content of the Result page will vary based on the result (success or failure). Result Figure 10-43 Success Page Result Figure 10-44 Failed Page 10.4.5.1.2.5 Setting Result
  • Epson TM-m50II | Web Config Reference Guide - Page 107
    10.4.5.2 Client Certificate 10.4.5.2.1 Top Page 10.4.5.2.1.1 Image The following figure shows the layout of the top page. Description Button Figure 10-45 Top Page 10.4.5.2.1.2 Description Table 10-98 Description Items "On the following page, configure the settings Fixed Strings on the CA
  • Epson TM-m50II | Web Config Reference Guide - Page 108
    10.4.5.2.1.4 Button The following table shows the buttons on the page. Items (Group Name) "Client Certificate" "CSR" Table 10-100 Button Items (Button Name) Description "Import" - Button for importing Client certificate "Confirm" - Button for confirming the imported Client certificate "
  • Epson TM-m50II | Web Config Reference Guide - Page 109
    10.4.5.2.3 Importing for Client Certificate 10.4.5.2.3.1 Import Top Page This page is shown after the 'Import' button in the Client certificate settings is pressed. The following figure shows the layout of the page for importing the Client certificate into the printer. 10.4.5.2.3.1.1 Image Setting
  • Epson TM-m50II | Web Config Reference Guide - Page 110
    10.4.5.2.3.1.4 Button The following table shows the buttons on the page. "OK" Items "Back" Table 10-104 Button Description Button at the bottom of the main frame to perform importing. After the "OK" button is pressed, Web Config performs the following operations depending on conditions. - If the
  • Epson TM-m50II | Web Config Reference Guide - Page 111
    "Invalid file." This message is shown in the Yes Yes No following cases. - The file uses an incorrect format or wrong interrelation. - The file size is greater than the stipulated range of 5k to 24k. (See the note.) - The private key and certificate do not match. - Incorrect chain. "
  • Epson TM-m50II | Web Config Reference Guide - Page 112
    10.4.5.2.4 Confirm for Client certificate 10.4.5.2.4.1 Top Page This page is shown after 'Confirm' for the import is pressed in the Client certificate settings. The format of the indicated page is the same as "Confirm for CA-signed certificate". 10.4.5.2.4.1.1 Display Items Items "Client
  • Epson TM-m50II | Web Config Reference Guide - Page 113
    10.4.5.2.5 Generate CSR(Certificate Signing Request) 10.4.5.2.5.1 Generate Top Page This page is shown after 'Generate' for importing in the CSR settings is pressed. The format of the indicated page is the same as "SSL/TLS > Certificate> Generate CSR". 10.4.5.2.5.1.1 Image Setting Items Button
  • Epson TM-m50II | Web Config Reference Guide - Page 114
    10.4.5.2.5.1.3 Button When the "Generate" button is pressed, Web Config displays a pop-up window with the following message if it recognizes an error in the entered value. "OK" "Back" Items Table 10-110 Button Description Button for generating CSR at the bottom of the main frame. Button at the
  • Epson TM-m50II | Web Config Reference Guide - Page 115
    )" "Connection Method" "EAP Type" Table 10-114 Setting Items Description Use the radio buttons to select "Enabled" or "Disabled". Condition Only products that support Wired LAN Display "Enable" or "Disable" Display "Wired LAN" / "Wi-Fi" / "Disable". - If it is not equipped with Wi-Fi chip. Select
  • Epson TM-m50II | Web Config Reference Guide - Page 116
    goes to the Confirm IEEE802.1X Settings page. If pressed, Web Config goes to the SSID Search page. Condition Only Wired LAN support products. Only products that support WPA2/WPA3-Enterprise If Web Config recognizes an error in the entered value after the button is pressed, the following error pop
  • Epson TM-m50II | Web Config Reference Guide - Page 117
    Settings page as below. You can choose a SSID on the searched SSID list by choosing a radio button or choose a radio button to specify any SSID manually. 10.4.6.1.3.1 Image Figure 10-53 Wi-Fi Settings Page SSDI List Refresh Button SSID
  • Epson TM-m50II | Web Config Reference Guide - Page 118
    security levels: "WPA2/WPA3-Enterprise" Condition - This item is displayed for models that use the Wi-Fi chip. - 10.4.6.1.3.3 SSID Manual Input You can specify any SSID manually. Items "Enter SSID" Table 10-119 SSID Manual Input Description A text box is provided so the user can enter an SSID
  • Epson TM-m50II | Web Config Reference Guide - Page 119
    10.4.6.1.4 Confirm IEEE802.1X Settings Page If the Next button is pressed on the IEEE802.1X Top page or Wi-Fi Settings page, Web Config goes to the Confirm IEEE802.1X Settings page. 10.4.6.1.4.1 Image Input Information Button Figure 10-54 Confirm IEEE802.1X Settings Page 10.4.6.1.4.2 Input
  • Epson TM-m50II | Web Config Reference Guide - Page 120
    "If connection is lost unintentionally, initialize the network settings on the product's control panel. And then configure it again." This message is shown at the bottom of the page. - Only from top page "If connection
  • Epson TM-m50II | Web Config Reference Guide - Page 121
    10.4.6.2 Client Certificate 10.4.6.2.1 Top Page The following figure shows the layout of the top page for certificate settings. The format of the indicated page is the same as "IPsec/IP Filtering > Importing for Client certificate". Description Button Figure 10-56 Top Page 10.4.6.2.1.1 Description
  • Epson TM-m50II | Web Config Reference Guide - Page 122
    10.4.6.2.1.3 Button The following table shows the buttons on the page. Items (Group Name) "Client Certificate" "CSR" Table 10-129 Button Items (Button Name) Description "Import" Button for importing Client certificate "Confirm" Button for confirming the imported Client certificate "Delete"
  • Epson TM-m50II | Web Config Reference Guide - Page 123
    10.4.6.2.3 Importing for Client Certificate 10.4.6.2.3.1 Import Top Page This page is shown after the 'Import' button in the Client certificate settings is pressed. The format of the indicated page is the same as "IPsec/IP Filtering > Importing for Client certificate". 10.4.6.2.3.1.1 Setting Items
  • Epson TM-m50II | Web Config Reference Guide - Page 124
    10.4.6.2.3.2 Error Pop-up Window If the "OK" button is pressed, the error pop-up window is shown if the entered value is invalid. The format of the indicated page is the same as "IPsec/IP Filtering > Importing for Client certificate". 10.4.6.2.3.2.1 Confirmation Message Items "Select a Client
  • Epson TM-m50II | Web Config Reference Guide - Page 125
    10.4.6.2.3.4 Result Page The following result is shown in the main frame after the "OK" button is pressed. The format of the indicated page is the same as "IPsec/IP Filtering > Importing for Client certificate". 10.4.6.2.3.4.1 Result Items Table 10-138 Result Description "Setup complete." "
  • Epson TM-m50II | Web Config Reference Guide - Page 126
    10.4.6.2.4 Confirm for Client Certificate This page is shown after 'Confirm' for the import is pressed in the Client certificate settings. The format of the indicated page is the same as "IPsec/IP Filtering > Confirm for Client certificate". 10.4.6.2.4.1 Display Items Items "Client Certificate" "CA
  • Epson TM-m50II | Web Config Reference Guide - Page 127
    10.4.6.2.6 Copying and Overwriting a Client Certificate 10.4.6.2.6.1 Warning Pop-up Window A pop-up window is shown when the 'Copy' is pressed if the Client Certificate was imported with this function. The format of the indicated page is the same as "Importing for CA-signed certificate". 10
  • Epson TM-m50II | Web Config Reference Guide - Page 128
    10.4.6.2.7 Generate CSR(Certificate Signing Request) 10.4.6.2.7.1 Generate Top Page This page is shown after 'Generate' for importing in the CSR settings is pressed. The format of the indicated page is the same as "SSL/TLS > Certificate> Generate CSR". 10.4.6.2.7.1.1 Setting Items The user must
  • Epson TM-m50II | Web Config Reference Guide - Page 129
    10.4.6.2.7.1.3 Result Page After the Generate CSR button is pressed, Web Config goes to the Result page. Table 10-149 Setting Result Items Description "Setup complete." This message is shown when the settings are completed. "Setup failed." This message is shown if the settings fail. 10
  • Epson TM-m50II | Web Config Reference Guide - Page 130
    10.5 Product Security 10.5.1 Password Encryption 10.5.1.1 Top Page 10.5.1.1.1 Image Setting Items Button Figure 10-59 Password Encryption 10.5.1.1.2 Setting Items The following table shows the item on the page. Items "Password Encryption" "Password Encryption" Table 10-150 Setting Items
  • Epson TM-m50II | Web Config Reference Guide - Page 131
    10.5.1.2 Result Page The result message is shown on the main frame after "OK" button is pressed. 10.5.1.2.1 Image Setting Result 10.5.1.2.2 Setting Result Items "Setup complete." "Setup failed." Figure 10-60 Result Page Table 10-153 Result Page Description This message is shown when the settings
  • Epson TM-m50II | Web Config Reference Guide - Page 132
    10.5.2 Change Administrator Password In this area, the user can change the authentication information for an administrator. The settings that are configured by the user in this area are used when an administrator logs on. 10.5.2.1 Top Page 10.5.2.1.1 Image Setting Items Button Figure 10-61 Change
  • Epson TM-m50II | Web Config Reference Guide - Page 133
    page "Restore Default Settings" If pressed, Web Config restores the setting values to the factory defaults. Condition Displayed only on models that support the initial value for the administrator password. When the "OK" button is pressed, Web Config displays a pop-up window with the following
  • Epson TM-m50II | Web Config Reference Guide - Page 134
    intends SSID and Password of Wi-Fi Direct. All sub-categories are selected. All sub-categories are selected. Services > Protocol in the menu is selected except for the following settings. Bonjour Service Name of Protocol is selected. All sub-categories are selected. Basic of SSL/TLS in the menu is
  • Epson TM-m50II | Web Config Reference Guide - Page 135
    10.6.1.2 Export The Export page consists of a Top page and a Result page. 10.6.1.2.1 Top Page 10.6.1.2.1.1 Image When "Export" is chosen in the menu frame, the top page for export is displayed as shown below. Comment Category Select Device Unique Setting Password enter Button Figure 10-63 Top Page
  • Epson TM-m50II | Web Config Reference Guide - Page 136
    is not checked. This item is displayed when "Obtain IP Address" is "Manual". IPv6 Address, IPv6 Address Default Gateway Check box is grayed-out, when " Settings Network Security Settings > S/MIME > Client Certificate Bonjour Service Name SSID and Password Network Security Settings > S/MIME >
  • Epson TM-m50II | Web Config Reference Guide - Page 137
    10.6.1.2.1.6 Button The following table shows the buttons on the page. "Export" Items Table 10-164 Button Description If pressed, the printer starts to create an export file. If file creation fails, Web Config goes to the Result page. After it is pressed, all items on the top page are grayed-out.
  • Epson TM-m50II | Web Config Reference Guide - Page 138
    10.6.1.3 Import The Import page consists of a Top page, Category Select page, Confirmation page, and Result page. 10.6.1.3.1 Top Page 10.6.1.3.1.1 Image When "Import" is chosen in the menu frame, the top page is displayed as shown below. Comment Setting Items Button Figure 10-64 Top Page 10
  • Epson TM-m50II | Web Config Reference Guide - Page 139
    10.6.1.3.1.4 Button The following table shows the buttons on the page. Table 10-169 Button Items Description "Next" If pressed, the Web Config makes transition to the Category Select page.If file analysis is failed, the Web Config makes transition to the Result page. After pressed, all
  • Epson TM-m50II | Web Config Reference Guide - Page 140
    Network Security Settings > IPsec/IP Filtering > Client Certificate Settings Network Security Settings > IEEE802.1X > Client Certificate Settings Bonjour Service Name SSID and Password Network Settings > LDAP Network Settings > Kerberos Network Security Settings > IPsec/IP Filtering > Basic Network
  • Epson TM-m50II | Web Config Reference Guide - Page 141
    Agreement. FOR USERS IN THE UNITED STATES, YOU AGREE TO IMPORTANT LEGAL TERMS AND CONDITIONS, INCLUDING A CLASS ACTION WAIVER AND ARBITRATION. PLEASE READ CAREFULLY:https://support.epson.net/eula/ Agree? " Table 10-176 Pop-Up Description This message is shown when the category is not checked. 141
  • Epson TM-m50II | Web Config Reference Guide - Page 142
    10.6.1.3.3 Confirmation Page 10.6.1.3.3.1 Image The page is shown when "Next" on the previous page is pressed. Comment Category Select Button Figure 10-66 Confirmation Page 10.6.1.3.3.2 Comment The following table shows the layout for comments. Comment "The symbols indicate as follows: " "!:
  • Epson TM-m50II | Web Config Reference Guide - Page 143
    10.6.1.3.4 Result Page 10.6.1.3.4.1 Result The content of the Result page will vary based on the result. Items "Shutting down. " "Restarting communication may take a few minutes. " "If you want to change the settings, close the Web Config and check your IP address. Then enter your IP address in the
  • Epson TM-m50II | Web Config Reference Guide - Page 144
    10.6.2 Firmware Update 10.6.2.1 Top Page 10.6.2.1.1 Image Display Items Description Button Figure 10-67 Top Page 10.6.2.1.2 Display Items "Current Version" Items Table 10-180 Display Items Description Up to 12 characters in ASCII codes XX.YY.ZZZZZZ -XX: Linux Kernel version -YY: Linux Appli
  • Epson TM-m50II | Web Config Reference Guide - Page 145
    10.6.2.2 Firmware Search Process Page The page is shown after the 'Start' button is pressed. The following figure shows a layout of the Firmware search process page. 10.6.2.2.1 Image Description Button Figure 10-68 Firmware Search Process Page 10.6.2.2.2 Description Items Items "Checking the
  • Epson TM-m50II | Web Config Reference Guide - Page 146
    IN THE UNITED STATES, YOU AGREE TO IMPORTANT LEGAL TERMS AND CONDITIONS, INCLUDING A CLASS ACTION WAIVER AND ARBITRATION. PLEASE READ CAREFULLY: https://support.epson.net/eula/" "Accept" Check box. When this item is checked then "Start" button is enable. 10.6.2.3.3 The Information of the
  • Epson TM-m50II | Web Config Reference Guide - Page 147
    10.6.2.3.4 Button "Cancel" "Start" Items Table 10-187 Button Description If you click, Firmware update is canceled. If you click, Firmware update is started. 10.6.2.4 Cancel Process Page 10.6.2.4.1 Image Description Button Figure 10-70 Cancel Process Page 10.6.2.4.2 Description Items "
  • Epson TM-m50II | Web Config Reference Guide - Page 148
    when the current version of the firmware is latest. "Cannot connect to the Epson server." This message is shown when the printer could not access to the an AC adapter if not connected." "Remove the memory card." "If the problem is not solved, close the Web browser and then launch it." "The
  • Epson TM-m50II | Web Config Reference Guide - Page 149
    10.6.3 Administrator Name / Contact Information In this area, the user can set the contact information for the administrator. 10.6.3.1 Top Page 10.6.3.1.1 Image Setting Items Button Figure 10-72 Contact Information Settings 10.6.3.1.2 Setting Items The following table shows the items on the page
  • Epson TM-m50II | Web Config Reference Guide - Page 150
    " "Date and Time" "Time Difference" "Time Server" Sub menu Table 10-194 Sub menu of Date and Time Condition Only printers that support NTP 10.6.4.1 Display Format The following figure shows the layout of this settings area. 10.6.4.1.1 Top Page 10.6.4.1.1.1 Image Setting Items Button Figure 10
  • Epson TM-m50II | Web Config Reference Guide - Page 151
    10.6.4.1.2 Result Page The result message is shown in the main frame after the "OK" button is pressed. 10.6.4.1.2.1 Image Results 10.6.4.1.2.2 Result Items "Setup complete" "Setup failed" Figure 10-74 Result Page Table 10-197 Results Description This message is shown when the settings are
  • Epson TM-m50II | Web Config Reference Guide - Page 152
    10.6.4.2 Date and Time 10.6.4.2.1 Top Page 10.6.4.2.1.1 Image Setting Items Button Figure 10-75 Date and Time settings 10.6.4.2.1.2 Setting Items The following table shows the items on the page. "Year" "Month" "Day" "AM/PM" Items Table 10-198 Setting Items Description Text box for entering a
  • Epson TM-m50II | Web Config Reference Guide - Page 153
    10.6.4.2.2 Result Page The following result is shown in the main frame after the "OK" button is pressed. 10.6.4.2.2.1 Image Result 10.6.4.2.2.2 Result Result is below. Items "Setup complete" "Setup failed" "Date and Time" Figure 10-76 Result Page Table 10-201 Result Description This message is
  • Epson TM-m50II | Web Config Reference Guide - Page 154
    10.6.4.3 Time Difference 10.6.4.3.1 Top Page 10.6.4.3.1.1 Image The following figure shows the layout of this settings area. Setting Items Button Figure 10-77 Time Difference 10.6.4.3.1.2 Setting Items The following table shows the items on the page. Table 10-202 Setting Items Items
  • Epson TM-m50II | Web Config Reference Guide - Page 155
    10.6.4.3.2 Result Page The result message is shown in the main frame after the "OK" button is pressed. 10.6.4.3.2.1 Image Result 10.6.4.3.2.2 Result Items "Setup complete" "Setup failed" Figure 10-78 Result Page Table 10-204 Results Description This message is shown when the settings are completed
  • Epson TM-m50II | Web Config Reference Guide - Page 156
    10.6.4.4 Time Server 10.6.4.4.1 Models that Support Node.js 10.6.4.4.1.1 Top Page 10.6.4.4.1.1.1 Image The following figure shows the layout of this settings area. Setting Items Button Figure 10-79 Time Server
  • Epson TM-m50II | Web Config Reference Guide - Page 157
    10.6.4.4.2 Progress Page The progress page indicating a sandglass is shown in the beginning when the Start button is pressed. On the progress page, the Web Config checks to see if the Refresh button is pressed and if the setup is completed periodically and makes transition to the Results page if the
  • Epson TM-m50II | Web Config Reference Guide - Page 158
    10.6.4.4.3 Result Page As soon as the result is determined, the following result message is shown in the main frame. 10.6.4.4.3.1 Image Result 10.6.4.4.3.2 Setting Result The result is shown below. Items "Setup complete" "Connection failed" "Check the settings" "Time server disabled" "Cannot access
  • Epson TM-m50II | Web Config Reference Guide - Page 159
    10.6.4.4.4 Models that Do Not Support Node.js 10.6.4.4.4.1 Top Page 10.6.4.4.4.1.1 Image The following figure shows a layout of this settings area. Setting Items Button Figure 10-82 Time Server Settings
  • Epson TM-m50II | Web Config Reference Guide - Page 160
    10.6.4.4.4.2 Result Page 10.6.4.4.4.2.1 Image Result 10.6.4.4.4.2.2 Setting Result Results are shown below. Items "Setup complete" "Setup failed" "Cannot access the product until processing is complete." Figure 10-83 Result Page Table 10-213 Result Description This message is shown when the
  • Epson TM-m50II | Web Config Reference Guide - Page 161
    -Print Version ePOS-Device Version Figure 11-1 Basic Table 11-1 Display Items Description Displays the model name. Displays the serial number. Displays version information for TM-i. Displays the destination. Display the version of ePOS-Print. Displays the version of ePOS-Device. 161
  • Epson TM-m50II | Web Config Reference Guide - Page 162
    11.2 Printer 11.2.1 Image 11.2.2 Display Items Items Printer List Device ID Model Name IP Address Figure 11-2 Printer Table 11-2 Display Items Description Displays a list of registered printers. The field for adding a new printer is shown in the bottom row. Displays the ID of the registered device
  • Epson TM-m50II | Web Config Reference Guide - Page 163
    11.3 ePOS-Print 11.3.1 Image 11.3.2 Display Items Items ePOS-Print Note Figure 11-3 ePOS-Print Table 11-3 Display Items Description Displays the ePOS-Print enable/disable settings. Displays any notes. 163
  • Epson TM-m50II | Web Config Reference Guide - Page 164
    11.4 ePOS-Device 11.4.1 Image 11.4.2 Display Items Items ePOS-Device Note Figure 11-4 ePOS-Device Table 11-4 Display Items Description Displays the ePOS-Device enable/disable settings. Displays any notes. 164
  • Epson TM-m50II | Web Config Reference Guide - Page 165
    11.5 Server Direct Print 11.5.1 Image 11.5.2 Display Items Items Server Direct Print Server1 Server2 Server3 URL Interval(s) ID Password URL Encode Name Server Authentication Figure 11-5 Server Direct Print Table 11-5 Display Items Description Displays the server direct settings. Displays the
  • Epson TM-m50II | Web Config Reference Guide - Page 166
    11.6 Status Notification 11.6.1 Image 11.6.2 Display Items Items Status Notification URL Interval(s) ID Password URL Encode Name Server Authentication Figure 11-6 Status Notification Table 11-6 Display Items Description Displays the status notification settings. Displays the URL of the server to
  • Epson TM-m50II | Web Config Reference Guide - Page 167
    11.7 Proxy 11.7.1 Image 11.7.2 Display Items Proxy URL Port ID Password Services Items Figure 11-7 Proxy Table 11-7 Display Items Description Displays the proxy authentication. Displays the password used for proxy authentication. Used to configure the services for activating the settings. 167
  • Epson TM-m50II | Web Config Reference Guide - Page 168
    11.8 Reset 11.8.1 Image 11.8.2 Display Items Items Restore Default Settings Figure 11-8 Reset Table 11-8 Display Items Description Click this button to restore the factory default settings. 168
  • Epson TM-m50II | Web Config Reference Guide - Page 169
    11.9 Help 11.9.1 Image 11.9.2 Display Items Items Input limit URL field ID field Password field Name field DeviceID field Interval(s) field Figure 11-9 Basic Table 11-9 Display Items Description Explanation of limitations on characters that can be used. Displays a description of the input
  • Epson TM-m50II | Web Config Reference Guide - Page 170
    Firmware Update Administrator Name/Contact Information Date and Time TM-Intelligent Models Display Always displayed Always displayed Always displayed Always displayed Always displayed Always displayed Always displayed TM-P20II, TM-P80II    - TM-m30III, TM-m30III-H, TM-m50II 170
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
Web Config Reference Guide
TM-P20II
TM-P80II
TM-m30III
TM-m30III-H
TM-m50II
M00152102
Rev.C