Epson TM-m50II Web Config Reference Guide - Page 125
Items, Description, Redirect, Import, Top Warning, Pop-up, after, Pressing, Reboot, Network,
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
10.4.6.2.3.4 Result Page The following result is shown in the main frame after the "OK" button is pressed. The format of the indicated page is the same as "IPsec/IP Filtering > Importing for Client certificate". 10.4.6.2.3.4.1 Result Items Table 10-138 Result Description "Setup complete." "Shutting down." "Restarting communication may take a few minutes." "If you want to change the settings, close the Web Config and check your IP address. Then enter your IP address in the browser to restart the Web Config." "Invalid password." "Invalid file." "Invalid date and time." "The certificate has expired. Check if the certificate is valid, or check the date and time on the product." This message is shown when importing is completed. This message is shown when importing and overwriting are completed. The network shuts down in order to update. This message is shown when the entered password is invalid. This message is shown in the following cases. - The file uses an incorrect format or wrong interrelation. - The file size is greater than the stipulated range of 5k to 24k. (See the note.) - The private key and certificate do not match. - Incorrect chain. This message is shown when an expired certificate is imported, and the date and time are not set. This message is shown when an expired certificate is imported, and the date and time are already set. Redirect from Import Top Page Yes Redirect from Warning Pop-up No Redirect after Pressing Reboot Network Button No No Yes Yes Yes Yes No Yes Yes No Yes Yes No Yes Yes No "Cannot use the Client Certificates that This message is shown when a server Yes Yes No include more than three CA certificates." certificate that includes more than 3 CA-signed certs is imported in PSCS#12. "Private key is required." This message is shown when a Yes Yes No private key is required. "Setup failed." This message is shown when Yes Yes No importing fails. "Setup failed." This message is shown when a No Yes Yes "Click [Reboot Network] to apply the network reboot fails. settings." "Communication will be shut down temporarily." "The setting may be applied to the communication after other settings are changed or the device is restarted." Note: If the size of a certificate to be imported is larger than 24KBytes, the device is unable to read it and a Web browser error is shown. 10.4.6.2.3.4.2 Button Items "Reboot Network" Table 10-139 Button Description Reboots the network If the network reboot is successful, Web Config displays the successful result page. If the network reboot fails, Web Config displays the same page. Condition If the network reboot fails 125