Home » Epson Manuals » Printers » Epson TM-m50II » Manual Viewer

Epson TM-m50II Web Config Reference Guide - Page 95

DH Group 1 / DH Group 2 / DH Group5 / DH

Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

"Remote Gateway(Tunnel Enter an IPv4 address or IPv6 address. Mode)" Max of 39 characters. "Security Protocol" Use the drop-down list to make a choice. "ESP" / "AH" If "IPsec/IP Filtering" is "Enable" , "Access Control" is "IPsec" and "Encapsulation" is "Tunnel Mode" ,it is possible to set this item. If "IPsec/IP Filtering" is "Enable" and "Access Control" is "IPsec", ,it is possible to set this item. "Algorithm Settings" "IKE" Title strings. "IKE", "ESP", and "AH" are included. - Title strings. "Encryption", "Authentication" and "Key Exchange" are contained. "Encryption" "Encryption" "Authentication" "Key Exchange" "Key Exchange" "ESP" Use the drop-down list to choose from the following. "AES-CBC-128" / "AES-CBC-192" / "AES-CBC-256" / "3DES" / "Any" Use the drop-down list to choose from the following. "AES-CBC-128" / "AES-CBC-192" / "AES-CBC-256" / "AES-GCM-128" / "AES-GCM-192" / "AES-GCM-256" / "3DES" / "Any" Use the drop-down list to choose from the following. "SHA-1" / "SHA-256" / "SHA-384" / "SHA-512" / "MD5" / "Any" This item is displayed when "IKE Version" is "IKEv1". This item is enabled when "IPsec/IP Filtering" is "Enable", "Access Control" is "IPsec". This item is displayed when "IKE Version" is "IKEv2". This item is enabled when "IPsec/IP Filtering" is "Enable", "Access Control" is "IPsec". This item is enabled when "IPsec/IP Filtering" is "Enable", "Access Control" is "IPsec". Use the drop-down list to choose from the following. "DH Group 1" / "DH Group 2" / "DH Group5" / "DH Group14" / "DH Group15" / "DH Group16" / "DH Group17" / "DH Group18" / "DH Group19" / "DH Group20" / "DH Group21" / "DH Group22" / "DH Group23" / "DH Group24" / "DH Group25" / "DH Group26" / "Any" Use the drop-down list to choose from the following. "DH Group 1" / "DH Group 2" / "DH Group5" / "DH Group14" / "DH Group15" / "DH Group16" / "DH Group17" / "DH Group18" / "DH Group19" / "DH Group20" / "DH Group21" / "DH Group22" / "DH Group23" / "DH Group24" / "DH Group25" / "DH Group26" / "DH Group27" / "DH Group28" / "DH Group29" / "DH Group30" / "Any" Title strings. "Encryption" and "Authentication" are contained. This item is displayed when "IKE Version" is "IKEv1". This item is enabled when "IPsec/IP Filtering" is "Enable", "Access Control" is "IPsec". This item is displayed when "IKE Version" is "IKEv2". This item is enabled when "IPsec/IP Filtering" is "Enable", "Access Control" is "IPsec". - "Encryption" "Authentication" Use the drop-down list to choose from the following. "AES-CBC-128" / "AES-CBC-192" / "AES-CBC-256" / "AES-GCM-128" / "AES-GCM-192" / "AES-GCM-256" / "3DES" / "Any" This item is enabled when "IPsec/IP Filtering" is "Enable", "Access Control" is "IPsec" and "Security Protocol" is "ESP". Use the drop-down list to choose from the following. "SHA-1" / "SHA-256" / "SHA-384" / "SHA-512" / "MD5" / "Any" This item is enabled when "IPsec/IP Filtering" is "Enable", "Access Control" is "IPsec" and "Security Protocol" is "ESP". This item is disabled when "Encryption" of "ESP" is "AES-GCM-128" or "AES-GCM-192" or "AES-GCM-256". 95

Section	Page
Cautions	2
Trademarks	2
About this Manual	2
Key to Symbols	2
Using Web Config	3
How to Start Web Config	3
1. Introduction	9
1.1 Definitions	9
1.2 Terminologies	9
2. Supported Web Browsers	10
3. Layout	10
3.1 Basic Settings Page	10
3.1.1 Configuration for Smartphones	10
3.1.2 Configuration for PC	11
3.2 Advanced Settings Page	12
4. Language	13
4.1 Supported Languages	13
4.2 Spec of Language	13
5. Top Page	13
5.1 URL	13
5.2 JavaScript	13
6. Administrator Password Settings	14
6.1 Top Page	14
6.1.1 Image	14
6.1.2 Setting Items	14
6.1.3 Button	14
7. User Authentication	15
7.1 Authentication Method	15
7.2 Pages Always can be Accessed	15
7.3 Log on Page	16
7.3.1 Image	16
7.3.2 Input Items	16
7.3.3 Button	16
7.4 Log on Failure Page	17
7.4.1 Image	17
7.4.2 Result	17
8. Common Specifications	18
8.1 Password Entry Field	18
9. Basic Settings Page	19
9.1 Log on Page	19
9.1.1 Top Page	19
9.1.1.1 Image	19
9.1.1.2 Display Language Setting	20
9.1.1.3 Network Status Information	20
9.1.1.4 Link Items	20
9.2 Log on Page	21
9.2.1 Image	21
9.2.2 Input Items	21
9.2.3 Button	21
9.3 Log on Failure Page	22
9.3.1 Image	22
9.3.2 Result	22
9.4 Wi-Fi Page	23
9.4.1 Top Page	23
9.4.1.1 Image	23
9.4.1.2 Setting Items	23
9.4.1.3 Button	23
9.4.2 SSID Setting Page	24
9.4.2.1 Image	24
9.4.2.2 Setting Items	24
9.4.2.3 Button	24
9.4.3 Result Page	25
9.4.3.1 Image	25
9.4.3.2 Setting Result	25
9.4.3.3 Button	25
9.5 Wi-Fi Direct Page	26
9.5.1 Top Page	26
9.5.1.1 Image	26
9.5.1.2 Setting Items	26
9.5.1.3 Buttons	26
9.5.2 Result Page	27
9.5.2.1 Image	27
9.5.2.2 Setting Result	27
9.5.2.3 Button	27
9.6 Print Settings Page	28
9.6.1 Top Page	28
9.6.1.1 Image	28
9.6.1.2 Setting Items	28
9.6.1.3 Buttons	29
9.6.2 Result Page	30
9.6.2.1 Image	30
9.6.2.2 Setting Result	30
9.6.2.3 Button	30
9.7 Firmware Update Page	31
9.7.1 Top Page	31
9.7.1.1 Image	31
9.7.1.2 Display Items	31
9.7.1.3 Description	31
9.7.1.4 Buttons	31
9.7.2 Firmware Search Process Page	32
9.7.2.1 Image	32
9.7.2.2 Description Items	32
9.7.2.3 Button	32
9.7.3 Before Update Confirm Page	33
9.7.3.1 Image	33
9.7.3.2 Description	33
9.7.3.3 The Information of the Firmware Update	33
9.7.3.4 Buttons	33
9.7.4 Cancel Process Page	34
9.7.4.1 Image	34
9.7.4.2 Description	34
9.7.4.3 Button	34
9.7.5 Result Page	34
9.7.5.1 Image	34
9.7.5.2 Setting Result	35
9.7.5.3 Button	35
9.8 Advanced Setting Link	35
10. Display or Setting Page	36
10.1 Status	36
10.1.1 Product Status	36
10.1.1.1 Top Page	36
10.1.2 Network Status	41
10.1.2.1 Top Page	41
10.1.3 TM-Intelligent	47
10.1.3.1 Top page	47
10.2 Print	48
10.2.1 Print Settings	48
10.2.1.1 Top Page	48
10.2.1.2 Result Page	49
10.3 Network	51
10.3.1 Network Basic	51
10.3.1.1 Top Page	51
10.3.1.2 Confirm Page	55
10.3.1.3 Result Page	56
10.3.2 Wi-Fi	57
10.3.2.1 Top Page	57
10.3.2.2 SSID Search Page	58
10.3.2.3 Wi-Fi Settings Page	58
10.3.2.4 Confirm Wi-Fi Setup Page	60
10.3.2.5 Result Page	61
10.3.3 Wired LAN	62
10.3.3.1 Top page	62
10.3.3.2 Confirm page	62
10.3.3.3 Result page	63
10.3.4 Wi-Fi Direct	64
10.3.4.1 Top Page	64
10.3.4.2 Confirm Page	66
10.3.4.3 Result Page	66
10.4 Network Security	67
10.4.1 Protocol	67
10.4.1.1 Top Page	67
10.4.1.2 Confirmation Page	71
10.4.1.3 Result Page	72
10.4.2 CA Certificate	73
10.4.2.1 Top Page	73
10.4.2.2 Import Page	75
10.4.2.3 Result Page	76
10.4.3 Root Certificate Update	77
10.4.3.1 Top Page	77
10.4.3.2 Progress Page	78
10.4.3.3 Result Page	78
10.4.4 SSL/TLS	80
10.4.4.1 Basic	80
10.4.4.2 Certificate	83
10.4.5 IPsec/IP Filtering	92
10.4.5.1 Basic	92
10.4.5.2 Client Certificate	107
10.4.6 IEEE802.1X	115
10.4.6.1 Basic	115
10.4.6.2 Client Certificate	121
10.5 Product Security	130
10.5.1 Password Encryption	130
10.5.1.1 Top Page	130
10.5.1.2 Result Page	131
10.5.2 Change Administrator Password	132
10.5.2.1 Top Page	132
10.5.2.2 Result Page	133
10.6 Device Management	134
10.6.1 Export and Import Setting Value	134
10.6.1.1 Export/Import Category	134
10.6.1.2 Export	135
10.6.1.3 Import	138
10.6.2 Firmware Update	144
10.6.2.1 Top Page	144
10.6.2.2 Firmware Search Process Page	145
10.6.2.3 Before Update Confirm Page	146
10.6.2.4 Cancel Process Page	147
10.6.2.5 Result Page	148
10.6.3 Administrator Name / Contact Information	149
10.6.3.1 Top Page	149
10.6.3.2 Result Page	149
10.6.4 Date and Time	150
10.6.4.1 Display Format	150
10.6.4.2 Date and Time	152
10.6.4.3 Time Difference	154
10.6.4.4 Time Server	156
11. TM-i Settings	161
11.1 Basic	161
11.1.1 Image	161
11.1.2 Display Items	161
11.2 Printer	162
11.2.1 Image	162
11.2.2 Display Items	162
11.3 ePOS-Print	163
11.3.1 Image	163
11.3.2 Display Items	163
11.4 ePOS-Device	164
11.4.1 Image	164
11.4.2 Display Items	164
11.5 Server Direct Print	165
11.5.1 Image	165
11.5.2 Display Items	165
11.6 Status Notification	166
11.6.1 Image	166
11.6.2 Display Items	166
11.7 Proxy	167
11.7.1 Image	167
11.7.2 Display Items	167
11.8 Reset	168
11.8.1 Image	168
11.8.2 Display Items	168
11.9 Help	169
11.9.1 Image	169
11.9.2 Display Items	169

Match case Limit results 1 per page

"Remote Gateway(Tunnel

Mode)"

Enter an IPv4 address or IPv6 address.

Max of 39 characters.

If "IPsec/IP Filtering" is "Enable" ,

"Access Control" is "IPsec" and

"Encapsulation" is "Tunnel

Mode" ,it is possible to set this

item.

"Security Protocol"

Use the drop-down list to make a choice.

"ESP" / "AH"

If "IPsec/IP Filtering" is "Enable"

and "Access Control" is "IPsec", ,it

is possible to set this item.

"Algorithm Settings"

Title strings. "IKE", "ESP", and "AH" are included.

"IKE"

Title strings. "Encryption", "Authentication" and "Key

Exchange" are contained.

"Encryption"

Use the drop-down list to choose from the following.

"AES-CBC-128" / "AES-CBC-192" / "AES-CBC-256" /

"3DES" / "Any"

This item is displayed when "IKE

Version" is "IKEv1".

This item is enabled when

"IPsec/IP Filtering" is "Enable",

"Access Control" is "IPsec".

"Encryption"

Use the drop-down list to choose from the following.

"AES-CBC-128" / "AES-CBC-192" / "AES-CBC-256" /

"AES-GCM-128" / "AES-GCM-192" / "AES-GCM-256" /

"3DES" / "Any"

This item is displayed when "IKE

Version" is "IKEv2".

This item is enabled when

"IPsec/IP Filtering" is "Enable",

"Access Control" is "IPsec".

"Authentication"

Use the drop-down list to choose from the following.

"SHA-1" / "SHA-256" / "SHA-384" / "SHA-512" / "MD5" /

"Any"

This item is enabled when

"IPsec/IP Filtering" is "Enable",

"Access Control" is "IPsec".

"Key Exchange"

Use the drop-down list to choose from the following.

"DH Group 1" / "DH Group 2" / "DH Group5" / "DH

Group14" / "DH Group15" / "DH Group16" / "DH

Group17" / "DH Group18" / "DH Group19" / "DH

Group20" / "DH Group21" / "DH Group22" / "DH

Group23" / "DH Group24" / "DH Group25" / "DH

Group26" / "Any"

This item is displayed when "IKE

Version" is "IKEv1".

This item is enabled when

"IPsec/IP Filtering" is "Enable",

"Access Control" is "IPsec".

"Key Exchange"

Use the drop-down list to choose from the following.

"DH Group 1" / "DH Group 2" / "DH Group5" / "DH

Group14" / "DH Group15" / "DH Group16" / "DH

Group17" / "DH Group18" / "DH Group19" / "DH

Group20" / "DH Group21" / "DH Group22" / "DH

Group23" / "DH Group24" / "DH Group25" / "DH

Group26" / "DH Group27" / "DH Group28" / "DH

Group29" / "DH Group30" / "Any"

This item is displayed when "IKE

Version" is "IKEv2".

This item is enabled when

"IPsec/IP Filtering" is "Enable",

"Access Control" is "IPsec".

"ESP"

Title strings. "Encryption" and "Authentication" are

contained.

"Encryption"

Use the drop-down list to choose from the following.

"AES-CBC-128" / "AES-CBC-192" / "AES-CBC-256" /

"AES-GCM-128" / "AES-GCM-192" / "AES-GCM-256" /

"3DES" / "Any"

This item is enabled when

"IPsec/IP Filtering" is "Enable",

"Access Control" is "IPsec" and

"Security Protocol" is "ESP".

"Authentication"

Use the drop-down list to choose from the following.

"SHA-1" / "SHA-256" / "SHA-384" / "SHA-512" / "MD5" /

"Any"

This item is enabled when

"IPsec/IP Filtering" is "Enable",

"Access Control" is "IPsec" and

"Security Protocol" is "ESP". This

item is disabled when

"Encryption" of "ESP" is

"AES-GCM-128" or "AES-GCM-192"

or "AES-GCM-256".