Epson TM-m50II Web Config Reference Guide - Page 98
Group Policy of IPsec Basic Top Table 10-92 Setting Items
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
10.4.5.1.1.2 Group Policy 10.4.5.1.1.2.1 Image The following figure shows the layout of the Setting Items on the Group Policy page. Setting Items Button Figure 10-41 Group Policy of IPsec Basic Top Page 10.4.5.1.1.2.2 Setting Items of Group Policy The following figure shows a layout of this settings area. Items "Each policy is applied with following priorities:" "Group Policy 1 > Group Policy 2 > ... > Group Policy 10 > Default Policy" "Enable this Group Policy" Table 10-92 Setting Items Description Description of the policy. Enabled if the check box is selected Description - - "Access Control" "Local Address(Printer)" "Local Address (Scanner)" - Use the drop-down list to make a choice. "Permit Access" / "Refuse Access" / "IPsec" -Use the drop-down list to make a choice. "Unavailable" / "Any addresses"/ /IPv4 Address / IPv6 Address / IPv6 Link-Local Address / IPv6 Stateful Address/ IPv6 Stateless Address 1 / IPv6 Stateless Address 2 / IPv6 Stateless Address 3 IPv6Address, IPv6LinklocalAddress, IPv6StatelessAddress1, IPv6StatelessAddress2, and IPv6StatelessAddress3 are displayed when the address is set. "Unavailable" is displayed when the Local Address and IP Address for the printer are incorrect. "Unavailable" is not set. If the method for IP Address is auto, you can select "Use automatically acquired IPv4 address (xxx.xxx.xxx.xxx)". - If "Enable this Group Policy" is enabled, this item can be configured. - If "Enable this Group Policy" is enable, it is possible to set this item. 98