Epson TM-m50II Web Config Reference Guide - Page 44
Table 10-10 Display Items Wi-Fi Direct
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Items "Device Name" Table 10-10 Display Items (Wi-Fi Direct) Description Shows the printer name currently used. - Condition "Connection Method" "IP Address" "Subnet Mask" "Default Gateway" "The number of connected devices" "SSID" "Not Set"/"Simple AP" "Auto"/"Manual" and IP address are displayed. The IP address is in the following format: "xxx.xxx.xxx.xxx". xxx: 0 - 255 in decimals "xxx.xxx.xxx.xxx" xxx: 0 - 255 in decimal "xxx.xxx.xxx.xxx" xxx: 0 - 255 in decimal Range of "0" - "8" 1 - 32 characters (alphanumeric characters and marks) "Channel" - If it is not equipped with Wi-Fi chip. Range of "1" - "13" Shown if "Connection Method" is not "Not Set" Shown if "Connection Method" is not "Not Set" Shown if "Connection Method" is not "Not Set" Shown if "Connection Method" is not "Simple AP". Shown if "Connection Method" is not "Not Set" Shown if "Connection Method" is not "Not Set" - If it is equipped with Wi-Fi chip. 2.4GHz Range of "1" - "13" "Security Level" "Password" "MAC Address" 5GHz "36"/"40"/"44"/"48"/"52"/"56"/"60"/"64"/"100"/"104"/"10 8"/"112"/"116"/"120"/"124"/"128"/"132"/"136"/"140"/"14 9"/"153"/"157"/"161"/"165" "WPA2-PSK(AES)" only "**********" "XX:XX:XX:XX:XX:XX" X: Range of "0" - "F" in hexadecimal Shown if "Connection Method" is not "Not Set" Shown if "Connection Method" is not "Not Set" Shown if "Connection Method" is not "Not Set" 44