Epson TM-m50II Web Config Reference Guide - Page 110
Items, Description, Redirect, Import, Top Warning, Pop-up, after, Pressing, Reboot, Network,
View all Epson TM-m50II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
10.4.5.2.3.1.4 Button The following table shows the buttons on the page. "OK" Items "Back" Table 10-104 Button Description Button at the bottom of the main frame to perform importing. After the "OK" button is pressed, Web Config performs the following operations depending on conditions. - If the entered value is invalid, Web Config displays a pop-up window with an error message. - If the entered value is NOT invalid and a Client Certificate was imported already, Web Config displays a pop-up window with a warning message. - If the entered value is NOT invalid and a Client Certificate was NOT imported already, Web Config displays a Result page. Button at the bottom of the main frame for going back to the top page of the certificate settings. 10.4.5.2.3.2 Result Page The following result is shown in the main frame after the "OK" button is pressed. 10.4.5.2.3.2.1 Image Result Page Button Figure 10-48 Result Page 10.4.5.2.3.2.2 Result Items Table 10-105 Result Description "Setup complete." This message is shown when importing is completed. "Shutting down." "Restarting communication may take a few minutes." "If you want to change the settings, close the Web Config and check your IP address. Then enter your IP address in the browser to restart the Web Config." "Invalid password." This message is shown when importing and overwriting are completed. The network shuts down in order to update. This message is shown when the entered password is invalid. Redirect from Import Top Page Redirect from Warning Pop-up Yes No Redirect after Pressing Reboot Network Button No No Yes Yes Yes Yes No 110