HP BladeSystem bc2800 HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 122
Upgrading the Integrated Administrator Firmware, Recovering a Lost Administrator Password
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Disabling Secure Shell causes the users to lose access to the Web-based user interface. ● To disable telnet communication, type: DISABLE TELNET Upgrading the Integrated Administrator Firmware The firmware associated with the Integrated Administrator can be upgraded remotely using the CLI using the management (10/100 Ethernet) connector located on the rear panel of the enclosure. UPDATE IMAGE The can be any of the following: ● http://host/path ● tftp://host/path ● ftp://username:password@host/path ● ftp://host/path ...where "host" is a fully qualified domain name or an IP address and path is the pathname of the flash image to download. Refer to the documentation associated with the firmware upgrade for detailed information. Recovering a Lost Administrator Password To recover a lost Administrator password: 1. Be sure the local client device is properly configured for local access to the Integrated Administrator. See Chapter 3, in section Requirements for Local Client Devices on page 11. 2. Connect a local client device to the Integrated Administrator (serial) console connector using the nullmodem serial cable (provided with the enclosure). 3. Open a terminal emulation application. 114 Chapter 8 Performing Advanced Functions ENWW