HP BladeSystem bc2800 HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 67
Show Tray Info, Show Enclosure Temp
View all HP BladeSystem bc2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
(continued) SHOW ENCLOSURE INFO Displays the enclosure name, type, part number, serial number, and asset tag; the Integrated Administrator software and hardware version; Integrated Administrator MAC address, and the interconnect tray type, part number, and serial number None SHOW ENCLOSURE POWER SUPPLY [ | ALL] Displays the power supply status, AC input status, capacity, input voltage range #1 (measured in Volts), input voltage range #2 (if necessary, measured in Volts), input frequency range (measured in Hertz), part number, serial number, and hardware revision for the specified power supply if one is specified or for all power supplies if ALL is given. None SHOW ENCLOSURE STATUS Under an enclosure status heading, this command displays the health, Integrated Administrator health, and unit identification LED of the enclosure. None Under a power status heading, this command displays the power status and capacity. SHOW ENCLOSURE TEMP Displays the locale, status (OK, warm, degraded, or failed), None temperature in degrees Fahrenheit, and temperature sensors. SHOW RACK NAME Shows the name for the rack where the enclosure resides None The default rack name is UnnamedRack. SHOW SYSLOG ENCLOSURE Displays the syslog of the enclosure with 22 lines per screen. Typing q quits the command, any other key shows the next screen if more information exists to display. Only enclosure administrators may execute this command. Typing c continuously displays the System Log without page breaks. SHOW TRAY INFO Displays the manufacturer, product name, part number, serial None number, and spare number of the interconnect tray. UPDATE IMAGE Downloads a new image from a blade over the network and Only enclosure administrators uses the image to update the firmware of the enclosure. may execute this command. URL can be any of the following: ● http://host/path ● tftp://host/path ● ftp:// username:password ● @host/path ● ftp://host/path where host is a fully qualified domain name or an IP address and path is the pathname of the flash image to download UPLOAD CONFIG Upload the current runtime configuration to the specified FTP Only enclosure administrators or TFTP server. may execute this command. ENWW Operating the Command Line Interface 59