HP Color LaserJet CM6049f HP Color LaserJet CM6049f MFP - User Guide - Page 270
Transparencies or glossy paper will not feed, HP Color LaserJet Brochure Paper, Glossy Q6611A
View all HP Color LaserJet CM6049f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
Paper does not feed from Tray 2, 3, 4, or 5 Cause None of the optional trays appear as input tray options. An optional tray is incorrectly installed. The paper size is not configured correctly for the input tray. The guides in the tray are not against the paper. Solution The optional trays only display as available if they are installed. Verify that any optional trays are correctly installed. Verify that the printer driver has been configured to recognize the optional trays. Print a configuration page to confirm that the optional tray is installed. If not, verify that the tray is correctly attached to the product. Print a configuration page or use the control panel to determine the paper size for which the tray is configured. Verify that the guides are touching the paper. Transparencies or glossy paper will not feed Transparencies or glossy paper will not feed Cause Solution The correct paper type is not specified in the software or printer Verify that the correct paper type is selected in the software or driver. printer driver. The input tray is overfilled. Remove excess paper from the input tray. Do not load more than 200 sheets of glossy paper or glossy film, or more than 100 transparencies in Tray 2, 3, 4, or 5. Do not exceed the maximum stack height marks for Tray 1. Paper in another input tray is the same size as the transparencies, and the product is defaulting to the other tray. Make sure that the input tray containing the transparencies or glossy paper is selected in the software program or printer driver. Use the product control panel to configure the tray to the paper type loaded. The tray containing the transparencies or glossy paper is not configured correctly for type. Make sure that the input tray containing the transparencies or glossy paper is selected in the software program or printer driver. Use the product control panel to configure the tray to the paper type loaded. Transparencies or glossy paper might not meet supported paper specifications. Use only paper that meets the HP paper specifications for this product. High-humidity environments may cause glossy paper not to feed, or to feed too many sheets. Print glossy paper from Tray 2, 3, 4, or 5 for best results. Avoid printing glossy paper in high humidity conditions. When printing glossy paper, removing the paper from the wrapper and letting it rest for a few hours can improve feeding into the product. However, letting paper rest in humid environments may also cause blisters. CAUTION: HP Color Laser Presentation Paper, Glossy (Q2546A) is not supported with this product. Using this type of paper can cause a fuser jam that might require the replacement of the fuser. Two recommended alternatives are HP Color LaserJet Presentation Paper, Soft Gloss (Q6541A) and HP Color LaserJet Brochure Paper, Glossy (Q6611A, Q6610A). For a list of supported paper types, see Supported paper types on page 98. 254 Chapter 15 Solve problems ENWW