HP Color LaserJet CM6049f HP Color LaserJet CM6049f MFP - User Guide - Page 47
Jetdirect menus continued, Menu item, Sub-menu item, Values and Description
View all HP Color LaserJet CM6049f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Table 2-11 Jetdirect menus (continued) Menu item Sub-menu item Proxy Server Sub-menu item Primary DNS Secondary DNS IPX/SPX Proxy Port Enable Frame Type AppleTalk DLC/LLC Enable Enable Values and Description Use this item to specify an IPv6 address for a primary DNS server that the print server should use. Use this item to specify an IPv6 address for a secondary DNS server that the print server should use. Specifies the proxy server to be used by embedded applications in the device. A proxy server is typically used by network clients for Internet access. It caches Web pages, and provides a degree of Internet security, for those clients. To specify a proxy server, enter its IPv4 address or fully-qualified domain name. The name can be up to 255 octets. For some networks, you may need to contact your Independent Service Provider (ISP) for the proxy server address. Type the port number used by the proxy server for client support. The port number identifies the port reserved for proxy activity on your network, and can be a value from 0 to 65535. Off: Disable the IPX/SPX protocol. On (default): Enable the IPX/SPX protocol. Selects the frame-type setting for your network. Auto: Automatically sets and limits the frame type to the first one detected. EN_8023, EN_II, EN_8022, and EN_SNAP: Frametype selections for Ethernet networks. Off: Disable the AppleTalk protocol. On (default): Enable the AppleTalk protocol. Off: Disable the DLC/LLC protocol. On (default): Enable the DLC/LLC protocol. ENWW Initial Setup menu 31