HP Color LaserJet CM6049f HP Color LaserJet CM6049f MFP - User Guide - Page 282
Performance problems
View all HP Color LaserJet CM6049f manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
Performance problems Problem Pages print but are totally blank. Pages print very slowly. Pages did not print. Cause Solution The sealing tape might still be in the print Verify that the sealing tape has been cartridges. completely removed from the print cartridges. The document might contain blank pages. Check the document that you are printing to see if content appears on all of the pages. The product might be malfunctioning. To check the product, print a Configuration page. Heavier media types can slow the print Print on a different type of media. job. Complex pages can print slowly. Proper fusing may require a slower print speed to ensure the best print quality. The RLT photo fix options under HP real life technologies on the Paper/ Quality tab of the print driver can cause slow printing. De-select these options to improve print speed. The product might not be pulling media Make sure paper is loaded in the tray correctly. correctly. The media is jamming in the device. The USB cable might be defective or incorrectly connected. If the problem persists, the pickup rollers and the separation pad might need to be replaced. Clear the jam. See Jams on page 222. ● Disconnect the USB cable at both ends and reconnect it. ● Try printing a job that has printed in the past. ● Try using a different USB cable. Other devices are running on your computer. The product might not share a USB port. If you have an external hard drive or network switchbox that is connected to the same port as the product, the other device might be interfering. To connect and use the product, you must disconnect the other device or you must use two USB ports on the computer. 266 Chapter 15 Solve problems ENWW