HP Dc5800 Service Reference Guide: HP Compaq dc5800 Business PC - Page 114
System Board
UPC - 883585860944
View all HP Dc5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
System Board 1. Prepare the computer for disassembly (Preparation for Disassembly on page 61). 2. Remove the computer access panel (Computer Access Panel on page 66). 3. Remove all expansion boards (Expansion Cards on page 73). 4. Disconnect all cables connected to the system board, noting their location for reinstallation. 5. Remove the heatsink (Heatsink on page 99). 6. Remove the seven screws that secure the system board to the chassis. 7. Slide the system board toward the front of the computer to disengage the I/O panel from the rear of the chassis. 8. Lift the system board out of the computer. When reinstalling the system board, first insert the I/O panel back into the slots in the rear of the chassis, and then align the board with the chassis screw holes. NOTE: When replacing the system board, you must change the chassis serial number in the BIOS. 106 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis