HP Dc5800 Service Reference Guide: HP Compaq dc5800 Business PC - Page 132
Populating DIMM Sockets, on Push the module down into the socket
UPC - 883585860944
View all HP Dc5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
4. Open both latches of the memory module socket (1), and insert the memory module into the socket (2). NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. A DIMM must occupy the black XMM1 socket. For maximum performance, populate the sockets so that the memory capacity is spread as equally as possible between Channel A and Channel B. Refer to Populating DIMM Sockets on page 122 for more information. 5. Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3). 6. Repeat steps 4 and 5 to install any additional modules. The computer should automatically recognize the additional memory the next time you turn on the computer. 124 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis