HP Dc7900 Service Reference Guide: HP Compaq dc7900 Business PC - Page 104
Connecting the Drive Cables Optical Drive shown
UPC - 884962028483
View all HP Dc7900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
NOTE: If you are installing a third optional drive, you may need to remove the strap that bundles the extra power connectors. 6. Connect the power cable (1) and data cable (2) to the rear of the optical drive or diskette drive. Figure 7-32 Connecting the Drive Cables (Optical Drive shown) 7. If you are installing a new drive, connect the opposite end of the data cable to the appropriate system board connector. NOTE: If you are installing a SATA optical drive, connect the first optical drive to the white SATA connector on the system board labeled SATA1. Connect a second optical drive to the next available (unpopulated) SATA connector following the numbered sequence of the connectors. If you are installing a diskette drive, connect it to the connector on the system board labeled FLOPPY. If your are installing a media card reader, connect the USB cable to the USB system board connector labeled MEDIA. If the media card reader includes a 1394 port, connect the 1394 cable to the 1394 PCI card. Refer to System Board Drive Connections on page 85 for an illustration of the system board drive connectors. 8. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for instructions on using Computer Setup. 92 Chapter 7 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis