HP Designjet 111 HP Designjet 111 Printer Series - User Guide - Page 10
The roll feed, The HP Jetdirect print server - paper
View all HP Designjet 111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Introduction The roll feed The roll feed is supplied with the HP Designjet 111 Roll printer. It allows the printer to print on a roll of paper up to 610 mm (24 in) wide. It includes an automatic cutter. The roll is loaded from the rear of the printer and must be fed into the rear feed slot. Once a print job to a roll has finished, the printer will automatically cut the roll. However, the cutter can be disabled from the printer driver. The printer also cuts the roll if you press the OK key. NOTE: If a roll of paper is loaded and you want to print to a cut sheet, you must first unload the roll. The HP Jetdirect print server The HP Jetdirect print server is a network card that can be installed in the printer. It allows the printer to be connected to a network, allowing the printer to be accessed from different computers on the network. To install the card, first turn off and unplug the printer. Then remove the blank plate from the rear left of the printer, and insert the card in its place. The card connects to the network via the socket on its end-plate. 4 Chapter 1 Introduction ENWW