HP Deskjet 990c HP DeskJet 990C Series Printer - (English) Online User's Guide - Page 19
Using Infrared with a PowerBook, Printing from a PowerBook, Printing Basics: Infrared Ir Printing
View all HP Deskjet 990c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Using Infrared with a PowerBook If your PowerBook is equipped with infrared technology that uses the IrDA protocol, you can establish wireless TCP/IP or AppleTalk connection. For instructions, refer to one of the following: • Reference guide or instructions that came with the PowerBook • Manufacturer's web site or support telephone number • Infrared Data Association (IrDA) web site at: http://www.irda.org Printing from a PowerBook 1 Make sure the printer is turned on. 2 Locate the infrared lens on the PowerBook. 3 Align the PowerBook's infrared lens with the printer's infrared lens. Position the PowerBook up to 3 feet (1 meter) from the printer and within a 30-degree total angle from the printer's infrared lens. • The path between the two infrared devices must be clear of obstacles. • When the two infrared devices are lined up correctly, the infrared light on the printer will begin to blink. This indicates that a connection has been established between the two devices. Printing Basics: Infrared (Ir) Printing 4 Select your printer using the Chooser. See "Choosing Your Printer" on page 5 for instructions. Note: If the PowerBook is moved out of range of the printer's infrared lens at any time during the printing process, the infrared light may turn off and the printer may stop printing. If you realign the devices within approximately 3-30 seconds, the print job will resume. 19