HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Command Refere - Page 127
IP Access List configuration, Autonomous System Path configuration
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Table 128 Route Map Configuration Menu options Command enable disable delete cur Description Enables the route map. Disables the route map. Deletes the route map. Displays the current route configuration. IP Access List configuration Command: /cfg/l3/rmap /alist [IP Access List 1 Menu] nwf - Network Filter number metric - Metric action - Set Network Filter action enable - Enable Access List disable - Disable Access List delete - Delete Access List current - Display current Access List configuration NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch. The route map number (1-32) and the access list number (1-8) represent the IP access list you wish to configure. The following table describes the IP Access List Configuration Menu options. Table 129 IP Access List Configuration Menu options Command nwf metric |none action permit|deny enable disable delete cur Description Sets the network filter number. Sets the metric value in the AS-External (ASE) LSA. Permits or denies action for the access list. Enables the access list. Disables the access list. Deletes the access list. Displays the current Access List configuration. Autonomous System Path configuration Command: /cfg/l3/rmap /aspath [AS Filter 1 Menu] as - AS number action - Set AS Filter action enable - Enable AS Filter disable - Disable AS Filter delete - Delete AS Filter current - Display current AS Filter configuration NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch. Configuration Menu 127