HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Command Refere - Page 150
ACL Meter configuration, In Profile Menu
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
ACL Meter configuration Command: /cfg/acl/acl /meter [Metering Menu] cir - Set committed rate in KiloBits/s mbsize - Set maximum burst size in KiloBits enable - Enable/disable port metering dpass - Set to Drop or Pass out of profile traffic reset - Reset meter parameters cur - Display current settings This menu defines the metering profile for the selected ACL. Table 164 ACL Meter Configuration Menu options Command cir mbsize enable e|d dpass drop|pass reset cur Description Configures the committed rate, in Kilobits per second. The committed rate must be a multiple of 64. Configures the maximum burst size, in Kilobits. Enter one of the following values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096 Enables or disables metering on the ACL. Configures the ACL Meter to either drop or pass out-of-profile traffic. Reset ACL Metering parameters to their default values. Displays the current ACL metering parameters. ACL Re-mark configuration Command: /cfg/acl/acl /re-mark [Re-mark Menu] inprof - In Profile Menu outprof - Out Profile Menu reset - Reset re-mark settings cur - Display current settings You can choose to re-mark IP header data for the selected ACL. You can configure different remark values, based on whether packets fall within the ACL Metering profile, or out of the ACL Metering profile. Table 165 ACL Re-mark Configuration Menu options Command inprof outprof reset cur Description Displays the Re-mark In-Profile Menu. Displays the Re-mark Out-of-Profile Menu. Reset ACL Re-mark parameters to their default values. Displays the current ACL re-mark parameters. Configuration Menu 150