HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Command Refere - Page 145
VRRP Interface configuration
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
The following table describes the Virtual Router Group Priority Tracking Configuration Menu options. Table 154 Virtual Router Group Priority Tracking Configuration Menu options Command ifs disable|enable ports disable|enable cur Description When enabled, the priority for this virtual router will be increased for each other IP interface active on this switch. An IP interface is considered active when there is at least one active port on the same VLAN. This helps elect the virtual routers with the most available routes as the master. This command is disabled by default. When enabled, the priority for this virtual router will be increased for each active port on the same VLAN. A port is considered "active" if it has a link and is forwarding traffic. This helps elect the virtual routers with the most available ports as the master. This command is disabled by default. Displays the current configuration for priority tracking for this virtual router. VRRP Interface configuration Command: /cfg/l3/vrrp/if [VRRP Interface 1 Menu] auth - Set authentication types passw - Set plain-text password del - Delete interface cur - Display current VRRP interface configuration NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch. This menu is used for configuring VRRP authentication parameters for the IP interfaces used with the virtual routers. The interface-number (1 to 255) represents the IP interface on which authentication parameters must be configured. The following table describes the VRRP Interface Configuration Menu options. Table 155 VRRP Interface Configuration Menu options Command auth none|password passw del cur Description Defines the type of authentication that will be used: none (no authentication), or password (password authentication). Defines a plain text password up to eight characters long. This password will be added to each VRRP packet transmitted by this interface when password authentication is chosen (see auth above). Clears the authentication configuration parameters for this IP interface. The IP interface itself is not deleted. Displays the current configuration for this IP interface's authentication parameters. VRRP Tracking configuration Command: /cfg/l3/vrrp/track [VRRP Tracking Menu] vrs - Set priority increment for virtual router tracking ifs - Set priority increment for IP interface tracking ports - Set priority increment for VLAN switch port tracking cur - Display current VRRP Priority Tracking configuration NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch. This menu is used for setting weights for the various criteria used to modify priority levels during the master router election process. Each time one of the tracking criteria is met, the priority level for the virtual router is increased by an amount defined through this menu. Configuration Menu 145