HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Command Refere - Page 131

The following table describes the Open Shortest Path First Menu options. Table 134 OSPF Configuration Menu options Command aindex range if virt md5key host redist lsdb default 1|2>|none on off cur Description Displays the area index menu. This area index does not represent the actual OSPF area number. Displays summary routes menu for up to 16 IP addresses. Displays the OSPF interface configuration menu. Displays the Virtual Links menu used to configure OSPF for a Virtual Link. Assigns a string to MD5 authentication key. Displays the menu for configuring OSPF for the host routes. Up to 128 host routes can be configured. Host routes are used for advertising network device IP addresses to external networks to perform server load balancing within OSPF. It also makes Area Border Route (ABR) load sharing and ABR failover possible. Displays Route Distribution Menu. Sets the link state database limit. Enter 0 (zero) for no limit. Sets one default route among multiple choices in an area. Enter none for no default route. Enables OSPF. Disables OSPF. Displays the current OSPF configuration settings. OSFP Area Index configuration Command: /cfg/l3/ospf/aindex [OSPF Area (index) 1 Menu] areaid - Set area ID type - Set area type metric - Set stub area metric auth - Set authentication type spf - Set time interval between two SPF calculations enable - Enable area disable - Disable area delete - Delete area cur - Display current OSPF area configuration NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch. Configuration Menu 131