HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Command Refere - Page 93

The following table describes the SSHD Configuration Menu options. Table 80 SSHD Configuration Menu options Command Description intrval scpadm hkeygen skeygen sshport ena dis on off cur Defines interval for auto-generating the RSA server key. The switch will auto-generate the RSA server key at the interval defined in this command. The value of zero (0) means the RSA server key auto-generation is disabled. If the switch has been busy performing any other key generation and the assigned time of interval expires, the RSA server will skip generating the key. Defines the administrator password that is for Secure Copy (SCP) only. The username for this SCP administrator is scpadmin. Typically, SCP is used to copy files securely from one machine to another. In the switch, SCP is used to download and upload the switch configuration using secure channels. Generates the RSA host keys manually. The switch creates this key automatically while configuring the switch with Secure Shell (SSH). But you can generate the key manually by using this command if you need to overwrite the key for security reasons. The command will take effect immediately without executing the apply command. Generates the RSA server key. The switch creates this key automatically while configuring the switch with Secure Shell (SSH). You can generate the key manually by using this command if you need to overwrite the key for security reasons. The command will take effect immediately without executing the apply command. Sets the SSH server port number. Enables the SCP apply and save. Disables the SCP apply and save. This is the default for SCP. Enables the SSH server. Disables the SSH server. This is the default for the SSH server. Displays the current SSH server configuration. RADIUS server configuration Command: /cfg/sys/radius [RADIUS Server Menu] prisrv - Set primary RADIUS server address secsrv - Set secondary RADIUS server address secret - Set primary RADIUS server secret secret2 - Set secondary RADIUS server secret port - Set RADIUS port retries - Set RADIUS server retries timeout - Set RADIUS server timeout telnet - Enable/disable RADIUS backdoor for telnet/ssh/http/https secbd - Enable/disable RADIUS secure backdoor for telnet/ssh/http/https on - Turn RADIUS authentication ON off - Turn RADIUS authentication OFF cur - Display current RADIUS configuration NOTE: See the HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Application Guide for information on RADIUS. Configuration Menu 93