HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Command Refere - Page 39

Table 22 STP parameters Parameter Designated port Description The port ID of the port on the Designated Bridge to which this port is connected. This information includes the port priority (hex) and the port number (hex). Rapid Spanning Tree and Multiple Spanning Tree information Command: /info/l2/stp upfast disabled, update 40 Spanning Tree Group 1: On (RSTP) VLANs: 1-3 4095 Current Root: Path-Cost Port Hello MaxAge FwdDel 8000 00:00:01:00:19:00 0 0 9 20 15 Parameters: Priority Hello MaxAge FwdDel Aging 32768 9 20 15 300 Port ---- 1 2 3 4 5 6 7 8 9 10 11 12 Prio ---- 0 0 0 0 0 0 0 0 0 0 0 0 Cost State Role Designated Bridge Des Port 0 DSB 0 DSB 0 DSB 0 DSB 0 DSB 0 DSB 0 DSB 0 DSB 0 DSB 0 DISC 0 FWD DESG 8000-00:00:01:00:19:00 8017 0 FWD DESG 8000-00:00:01:00:19:00 8018 Type ---- P2P2,Edge P2P The switch software can be set to use the IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) or the IEEE 802.1s Multiple Spanning Tree Protocol (MSTP). If RSTP/MSTP is turned on, you can view the following RSTP bridge information for the Spanning Tree Group: • Status of Uplink Fast (upfast) • Current root MAC address • Path-Cost • Port • Hello interval • Maximum age value • Forwarding delay • Aging time You can also refer to the following port-specific RSTP information: • Port number and priority • Cost • State • Role • Designated bridge and port • Link type Information Menu 39