HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Command Refere - Page 128
Routing Information Protocol configuration
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
The rmap number (1-32) and the path number (1-8) represent the AS path you wish to configure. The following table describes the Autonomous System Path Configuration Menu options. Table 130 Autonomous System Path Configuration Menu options Command as action permit|deny enable disable delete cur Description Sets the Autonomous System filter's path number. Permits or denies Autonomous System filter action. Enables the Autonomous System filter. Disables the Autonomous System filter. Deletes the Autonomous System filter. Displays the current Autonomous System filter configuration. Routing Information Protocol configuration Command: /cfg/l3/rip [Routing Information Protocol Menu] if - RIP Interface Menu update - Set update period in seconds redist - RIP Route Redistribute Menu on - Globally turn RIP ON off - Globally turn RIP OFF current - Display current RIP configuration NOTE: This menu is available only on the GbE2c Layer 2/3 Ethernet Blade Switch. The RIP Menu is used for configuring Routing Information Protocol parameters. This option is turned off by default. The following table describes the RIP Configuration Menu options. Table 131 RIP Configuration Menu options Command if update redist on off cur Description Displays the RIP Interface menu. Configures the time interval for sending for RIP table updates, in seconds. The default value is 30 seconds. Displays the RIP Route Redistribute menu. Globally turns RIP on. Globally turns RIP off. Displays the current RIP configuration. Configuration Menu 128