HP Integrity rx4640 Windows Integrity Management Agents Reference - Page 74

Parity error in Reg FIFO., Replace I/O chassis.

Get HP Integrity rx4640 PDF manuals and user guides View all HP Integrity rx4640 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

5417 5418 5419 5420 5432 5438 5440 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5464 5467 5468 5473 5474 5478 5479 5483 ROM is corrupt. Replace the rom or reprogram flash. Verify all connections of PDH bus components or replace the cell board. A PCI card is configured with mixed speeds. Correct the configuration problem. Too many PCI bridge cards are configured in single PCI segment mode. Reconfigure PCI cards and remove some of the bridge devices. Hardware problem such as cable connect error or bad cables. Correct the hardware problem and re-boot. SuperIO has been detected in the PCI slot. No action required, information only. IO link error was detected and corrected. No action required, information only. Parity error in Reg FIFO. Replace bad hardware. SBA TLB fetch timeout error. Replace faulty hardware. Link presence lost on SBA interface. Replace faulty hardware. Bad hardware. Replace I/O chassis. An IO device is requesting access to an invalid TLB entry. Driver problem - debug driver. SBA memory fetch timeout error repair faulty hardware LBA firmware initialization failed Review additional error logs to determine exact cause of failure. An LBA correctable timeout error occurred. No action necessary, the error was corrected. Information only. An LBA uncorrectable function error was encountered. Replace/repair faulty hardware. LBA uncorrectable timeout error encountered Repair/replace faulty hardware. LBA uncorrectable error encountered. Repair/replace faulty hardware. LBA encountered an uncorrectable parity error. Repair/replace faulty hardware. LBA fatal error encountered. Repair/replace the faulty hardware. An LBA fatal function error was encountered. Repair/replace the faulty hardware. An LBA fatal parity error encountered. Repair/replace the faulty hardware. LBA fatal timeout error encountered. Repair/replace the faulty hardware. A PCI card uncorrectable error was encountered. Replace the faulty PCI card. A fatal error was detected on a PCI card. Repair/replace the faulty PCI card. Replace any bad dimms. Reinitialize the options data. Verify options data and reinitialize if necessary. Reconfigure and Reset. Reset. Reset. Reset Reset 74 Management Agents Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
ROM is corrupt. Replace the rom or reprogram
flash.
5417
Verify all connections of PDH bus components
or replace the cell board.
5418
Correct the configuration problem.
A PCI card is configured with mixed speeds.
5419
Reconfigure PCI cards and remove some of the
bridge devices.
Too many PCI bridge cards are configured in
single PCI segment mode.
5420
Correct the hardware problem and re-boot.
Hardware problem such as cable connect error
or bad cables.
5432
No action required, information only.
SuperIO has been detected in the PCI slot.
5438
No action required, information only.
IO link error was detected and corrected.
5440
Replace bad hardware.
Parity error in Reg FIFO.
5442
Replace faulty hardware.
SBA TLB fetch timeout error.
5443
Replace faulty hardware.
Link presence lost on SBA interface.
5444
Replace I/O chassis.
Bad hardware.
5445
Driver problem - debug driver.
An IO device is requesting access to an invalid
TLB entry.
5446
repair faulty hardware
SBA memory fetch timeout error
5447
Review additional error logs to determine exact
cause of failure.
LBA firmware initialization failed
5448
No action necessary, the error was corrected.
Information only.
An LBA correctable timeout error occurred.
5449
Replace/repair faulty hardware.
An LBA uncorrectable function error was
encountered.
5450
Repair/replace faulty hardware.
LBA uncorrectable timeout error encountered
5451
Repair/replace faulty hardware.
LBA uncorrectable error encountered.
5452
Repair/replace faulty hardware.
LBA encountered an uncorrectable parity error.
5453
Repair/replace the faulty hardware.
LBA fatal error encountered.
5454
Repair/replace the faulty hardware.
An LBA fatal function error was encountered.
5455
Repair/replace the faulty hardware.
An LBA fatal parity error encountered.
5456
Repair/replace the faulty hardware.
LBA fatal timeout error encountered.
5457
Replace the faulty PCI card.
A PCI card uncorrectable error was encountered.
5458
Repair/replace the faulty PCI card.
A fatal error was detected on a PCI card.
5459
Replace any bad dimms.
5464
Reinitialize the options data.
5467
Verify options data and reinitialize if necessary.
5468
Reconfigure and Reset.
5473
Reset.
5474
Reset.
5478
Reset
5479
Reset
5483
74
Management Agents Event Tables