HP Integrity rx4640 Windows Integrity Management Agents Reference - Page 96
Check XBC, Backplane, Flex Cables, Contact HP, Fabric AccessError, XBC Key Disabled. Check
View all HP Integrity rx4640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
8882 8883 8894 8895 8896 8897 8898 8900 8906 8924 8926 8930 8931 8936 8939 8940 8941 8942 8954 8959 8960 8962 8964 8965 Specify a valid parameter. Clear NVRAM. link failure between the XBC and the CC Check CC. Fabric Access Failure. Contact HP Support personnel to analyze the fabric. CSR Read/Write error Contact HP Support personnel to analyze the fabric. Fabric AccessError. Contact HP Support personnel to analyze the fabric. CC CSR access failure. Contact HP Support personnel to analyze the fabric. CC CSR Access Failure. Contact HP Support personnel to analyze the fabric. The MP is not functioning or the PDHC cannot communicate with it. Reset the MP. Contact the Response Center to report defect System Firmware design or code bug is likely. Upgrade PDC firmware Fabric AccessError. Contact HP Support personnel to analyze the fabric. Most likely a hardware problem, but confirm the Check XBC, Backplane, Flex Cables, Contact HP cause by looking at the return status. Support Personnel for further troubleshooting. Fabric Access problem. Either an error reading the hardware or XBC Key contention. Look for additional chassis codes to provide detail. Check XBC, Backplane, Flex Cables, Contact HP Support Personnel. An unanticipated error occurred. Contact HP Support personnel to analyze the IPMI FPL log. Firmware problem. Contact HP Support Personnel. If in manufacturing, reprogram the partition specific field of the CPU module(s) FRU The CPU module(s) that are installed have invalid EEPROM. Otherwise, contact HP support data stored in the partition specific field of the personnel to troubleshoot the unreported CPU FRU EEPROM. module. At least one of the installed CPU modules are Contact HP support personnel to troubleshoot incompatible with at least one other CPU module. the CPU modules on the Cell. The CPU module is not an HP CPU module, or the FRUID data for this CPU module has not been Contact HP support personnel to troubleshoot programmed. the CPU module. The Cell Battery is low. It needed to be replaced. Error accessing XBC CSRs. Contact HP Support personnel to analyze the fabric. Fabric AccessError, XBC Key Disabled. Check XBC, links, backplane, Contact HP Support Personnel for further troubleshooting. Fabric AccessError. Check XBC, Check links. Fabric AccessError. Couldn't write this XBC. Contact HP Support personnel to analyze the fabric. Fabric AccessError. Couldn't read or write this Contact HP Support personnel to analyze the XBC. fabric. 96 Management Agents Event Tables