HP Kayak XA-s 02xx HP Kayak XA-s PC Workstation - User Guide for Minitower Mod - Page 114
Host SCSI ID, Scan Order, Removable Media, Support, CHS Mapping
View all HP Kayak XA-s 02xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
geron.bk : geron-4.fb4 Page 102 Sunday, March 22, 1998 5:03 AM 4 Technical Information Using the SCSI Configuration Utility (Selected Models) Host SCSI ID Scan Order Removable Media Support CHS Mapping In general it is not advisable to change your host adapter ID from the default value of 7, as this gives it the highest priority on the SCSI bus. However, if you have two adapters sharing the same SCSI devices, you should give one of the adapters a currently-unassigned ID to avoid duplication of SCSI IDs. This option lets you tell the host adapter BIOS and your device drivers to scan the SCSI bus from low to high (0 to max) SCSI ID, or from high to low (max to 0) SCSI ID. If you have more than one device on a SCSI bus, changing the device order changes the drive letters which are assigned to them by the system.This will change the boot order. Only used when removable disk drives are installed. For more information, refer to the User's Guide that came with you removable disk drive. When performing a 'low format', CHS mapping should be set to Alternate CHS Mapping for full compatibility with other SCSI adapters. This is the default setting. 102 English